On Dec 29, 2011, at 5:25 PM, Dan Langille wrote: > > On Dec 29, 2011, at 2:48 PM, John Drescher wrote: > >> On Thu, Dec 29, 2011 at 2:42 PM, ninyo <ninyod...@gmail.com> wrote: >>> Hello >>> >>> Fresh Bacula 5.0.2 install from apt = same error >>> Fresh Bacula 5.2.3 compiled from sources, with default conf files = same >>> error >>> >>> Maybe i have to start thinking on library error? Anyone have an idea about >>> how to test this? >>> >> >> It is recommended that you use bar code labels on your autochanger if >> you have a changer with a barcode reader. I have seen reports of users >> working without barcodes in the past however I can not help with that. >> I have no experience with that type of setup. > > I am using a tape library with FreeBSD and Bacula 5.0.3 > > Getting the library working can be tricky with respect to permissions. > > If I recall correctly, if you do not have a barcode reader, you must supply > the > list of volume names in a file, which is then used instead of the barcode > reader. > > The details do not come to mind immediately.
I use mtx-changer and in there you will find the list command (around line 171). This uses the mtx status command to get the list of tapes. Try that command manually. f that doesn't work for you from the command line, you've got to find another way to get the list of volumes from the tape library. -- Dan Langille - http://langille.org ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
