Bruno, thank you very much, that did the trick. I have always specified the filesystems as I typically run multiple file systems, however I have don't use onefs = no normally either.
Then the question is... When using onefs = no is the fstype no longer required as bacula will not care? Is it best to not specifiy the fstype and let bacula figure it out even with onefs = yes? -----Original Message----- From: Bruno Friedmann [mailto:br...@ioda-net.ch] Sent: Friday, November 11, 2011 3:46 AM To: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] I am mising something - unlisted fstype "unknown" CRM:0003018 On 11/11/2011 01:40 AM, Mark Yarbrough wrote: > I have a Debian (squeeze) system using bacula 5.0.2 with vchanger implemented. > > I have an odd situation as to I have to backup some NFS mounts from a > Synology NAS. The backups are fine save when I try to transcend into the NFS > mounts. I am getting the following error. From all that I have read I > believe I have this setup correctly. Any suggestions would be welcome. > > 10-Nov 16:30 lv-backup-fd JobId 70: Top level directory > "/srv/Synology/volume1/Creative" has unlisted fstype "unknown" > 10-Nov 16:30 lv-backup-fd JobId 70: Top level directory > "/srv/Synology/volume1/Agency" has unlisted fstype "unknown" > 10-Nov 16:30 lv-backup-fd JobId 70: Top level directory > "/srv/Synology/volume1/Vendors" has unlisted fstype "unknown" > 10-Nov 16:30 lv-backup-fd JobId 70: Top level directory > "/srv/Synology/volume1/Clients" has unlisted fstype "unknown" > 10-Nov 16:30 lv-backup-fd JobId 70: Top level directory > "/srv/Synology/volume1/DCS" has unlisted fstype "unknown" > > My FileSet looks like > FileSet { > Name = "linux-generic" > Include { > Options { > signature = SHA1 > verify = pins1 > fstype = ext2 > fstype = xfs > fstype = ext3 > aclsupport = yes > onefs = no > } > File = /etc > File = /usr/local > File = /var > File = /home > File = /boot > File = /root > File = /srv/Synology/volume1/Creative > File = /srv/Synology/volume1/Agency > File = /srv/Synology/volume1/Vendors > File = /srv/Synology/volume1/Clients > File = /srv/Synology/volume1/DCS > } > Exclude { > File = /proc > File = /tmp > File = /.journal > File = /.fsck > } > } > > Mark Yarbrough > > I don't know why you specify the fstype in your option, What happen if you comment them. -- Bruno Friedmann Ioda-Net Sàrl www.ioda-net.ch openSUSE Member & Ambassador GPG KEY : D5C9B751C4653227 irc: tigerfoot ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users ------------------------------------------------------------------------------ RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
