i had the same issue one year ago when i tried the "virtual full" feature. .
i also posted the problem on the devel list but nobody seems interested in fixing this bug. i switched to rsync disk based backups maybe you'll find a suitable solution . Dil "Mark Bergman" <mark.berg...@uphs.upenn.edu> a écrit dans le message de news:20110902163018.02029...@uphs.upenn.edu... > We're still experiencing the same problem I described last week (please > see below). The only update I can offer is that the problem is not > dependent on the specific tape drive. If all tapes are unloaded and bacula > loads a volume into drive0 (as opposed to drive1 as described below), then > bacula still waits for the drive to mount. > > Are there any suggestions for a fix? > > Thanks, > > Mark > > ---------------------------------------------------------------------- > Begin forwarded message: > > Date: Fri, 26 Aug 2011 16:08:00 -0400 > From: Mark Bergman <mark.berg...@uphs.upenn.edu> > To: bacula-users@lists.sourceforge.net > Subject: [Bacula-users] bacula does not mount tape that's already loaded > > > > We're using Bacula 5.0.2 with a 2-drive tape library. Jobs are waiting on > a > mount request for a tape that's already in the desired drive. The tape was > loaded by bacula (not manually), but does not get mounted. > > Bacula and "mtx" both agree that the requested tape (004037) is in drive1, > but > bacula does not automount the tape and it cannot be mounted manually. > > The tape has been used previously, so it does not need to be labeled. The > option "AutomaticMount" is set to "yes" for both tape drives in > bacula-sd.conf. > > This problem persists after restarting bacula-sd and bacula-dir. > > If I unload the tape (release or umount w/in bacula, or via mtx), bacula > successfully reloads the tape into the correct drive, but it does not > mount it. > > Any suggestions? > > Thanks, > > Mark > > Selected command output below: > ------------------------ > #stat dir > > Running Jobs: > Console connected at 26-Aug-11 15:01 > JobId Level Name Status > ====================================================================== > 40222 Increme client.2011-08-25_22.45.00_03 is waiting for a mount > > #stat stor > Running Jobs: > Writing: Incremental Backup job client JobId=40222 Volume="004037" > pool="Incremental" device="drv1" (/dev/tape1) > spooling=0 despooling=0 despool_wait=0 > Files=0 Bytes=0 Bytes/sec=0 > FDReadSeqNo=6 in_msg=6 out_msg=4 fd=6 > > Device status: > Autochanger "ml6000" with devices: > "drv0" (/dev/tape0) > "drv1" (/dev/tape1) > Device "drv0" (/dev/tape0) is mounted with: > Volume: 004035 > Pool: Archive > Media type: LTO2 > Slot 1 is loaded in drive 0. > Total Bytes=15,398,240,256 Blocks=238,687 Bytes/block=64,512 > Positioned at File=6 Block=0 > Device "drv1" (/dev/tape1) open but no Bacula volume is > currently mounted. > Device is BLOCKED waiting for mount of volume "004037", > Pool: Incremental > Media type: LTO2 > Slot 2 is loaded in drive 1. > Total Bytes Read=11,999,232 Blocks Read=186 Bytes/block=64,512 > Positioned at File=0 Block=0 > > > Used Volume status: > 004035 on device "drv0" (/dev/tape0) > Reader=0 writers=0 devres=0 volinuse=0 > 004037 on device "drv1" (/dev/tape1) > Reader=0 writers=0 devres=5 volinuse=0 > > #mount storage=ml6000 drive=1 slot=2 > 3001 OK mount requested. Specified slot ignored. Device="ml6000-drv1" > (/dev/tape1) > 26-Aug 15:30 sbia-infr-vbacula JobId 40222: Please mount Volume > "004037" or > label a new one for: > Job: client.2011-08-25_22.45.00_03 > Storage: "ml6000-drv1" (/dev/tape1) > Pool: Incremental > Media type: LTO2 > # > > # query > 11 > > +-------+---------------+-----------------------+------------+ > | Jobs | Files | Bytes | VolumeName | > +-------+---------------+-----------------------+------------+ > | 179 | 49,555,030 | 25,913,161,291,440 | 004037 | > +-------+---------------+-----------------------+------------+ > > > > > ---------------------------- > > mtx -f /dev/changer status | head -5 > Storage Changer /dev/changer-ml6000:2 Drives, 40 Slots ( 6 > Import/Export ) > Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag = > 004035 > Data Transfer Element 1:Full (Storage Element 2 Loaded):VolumeTag = > 004037 > Storage Element 1:Empty:VolumeTag= > Storage Element 2:Empty:VolumeTag= > ---- > Mark Bergman voice: 215-662-7310 > mark.berg...@uphs.upenn.edu fax: 215-614-0266 > System Administrator Section of Biomedical Image Analysis > Department of Radiology University of Pennsylvania > PGP Key: https://www.rad.upenn.edu/sbia/bergman > > ==vv ANY TEXT BELOW THIS LINE WAS ADDED WITHOUT MY CONSENT OR APPROVAL > vv== > > ------------------------------------------------------------------------------ > Special Offer -- Download ArcSight Logger for FREE! > Finally, a world-class log management solution at an even better > price-free! And you'll get a free "Love Thy Logs" t-shirt when you > download Logger. Secure your free ArcSight Logger TODAY! > http://p.sf.net/sfu/arcsisghtdev2dev ------------------------------------------------------------------------------ Special Offer -- Download ArcSight Logger for FREE! Finally, a world-class log management solution at an even better price-free! And you'll get a free "Love Thy Logs" t-shirt when you download Logger. Secure your free ArcSight Logger TODAY! http://p.sf.net/sfu/arcsisghtdev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
