We're using Bacula 5.0.2 with a 2-drive tape library. Jobs are waiting on a
mount request for a tape that's already in the desired drive. The tape was
loaded by bacula (not manually), but does not get mounted.
Bacula and "mtx" both agree that the requested tape (004037) is in drive1, but
bacula does not automount the tape and it cannot be mounted manually.
The tape has been used previously, so it does not need to be labeled. The
option "AutomaticMount" is set to "yes" for both tape drives in
bacula-sd.conf.
This problem persists after restarting bacula-sd and bacula-dir.
If I unload the tape (release or umount w/in bacula, or via mtx), bacula
successfully reloads the tape into the correct drive, but it does not mount it.
Any suggestions?
Thanks,
Mark
Selected command output below:
------------------------
#stat dir
Running Jobs:
Console connected at 26-Aug-11 15:01
JobId Level Name Status
======================================================================
40222 Increme client.2011-08-25_22.45.00_03 is waiting for a mount
#stat stor
Running Jobs:
Writing: Incremental Backup job client JobId=40222 Volume="004037"
pool="Incremental" device="drv1" (/dev/tape1)
spooling=0 despooling=0 despool_wait=0
Files=0 Bytes=0 Bytes/sec=0
FDReadSeqNo=6 in_msg=6 out_msg=4 fd=6
Device status:
Autochanger "ml6000" with devices:
"drv0" (/dev/tape0)
"drv1" (/dev/tape1)
Device "drv0" (/dev/tape0) is mounted with:
Volume: 004035
Pool: Archive
Media type: LTO2
Slot 1 is loaded in drive 0.
Total Bytes=15,398,240,256 Blocks=238,687 Bytes/block=64,512
Positioned at File=6 Block=0
Device "drv1" (/dev/tape1) open but no Bacula volume is
currently mounted.
Device is BLOCKED waiting for mount of volume "004037",
Pool: Incremental
Media type: LTO2
Slot 2 is loaded in drive 1.
Total Bytes Read=11,999,232 Blocks Read=186 Bytes/block=64,512
Positioned at File=0 Block=0
Used Volume status:
004035 on device "drv0" (/dev/tape0)
Reader=0 writers=0 devres=0 volinuse=0
004037 on device "drv1" (/dev/tape1)
Reader=0 writers=0 devres=5 volinuse=0
#mount storage=ml6000 drive=1 slot=2
3001 OK mount requested. Specified slot ignored. Device="ml6000-drv1"
(/dev/tape1)
26-Aug 15:30 sbia-infr-vbacula JobId 40222: Please mount Volume "004037" or
label a new one for:
Job: client.2011-08-25_22.45.00_03
Storage: "ml6000-drv1" (/dev/tape1)
Pool: Incremental
Media type: LTO2
#
# query
11
+-------+---------------+-----------------------+------------+
| Jobs | Files | Bytes | VolumeName |
+-------+---------------+-----------------------+------------+
| 179 | 49,555,030 | 25,913,161,291,440 | 004037 |
+-------+---------------+-----------------------+------------+
----------------------------
mtx -f /dev/changer status | head -5
Storage Changer /dev/changer-ml6000:2 Drives, 40 Slots ( 6 Import/Export )
Data Transfer Element 0:Full (Storage Element 1 Loaded):VolumeTag = 004035
Data Transfer Element 1:Full (Storage Element 2 Loaded):VolumeTag = 004037
Storage Element 1:Empty:VolumeTag=
Storage Element 2:Empty:VolumeTag=
----
Mark Bergman voice: 215-662-7310
mark.berg...@uphs.upenn.edu fax: 215-614-0266
System Administrator Section of Biomedical Image Analysis
Department of Radiology University of Pennsylvania
PGP Key: https://www.rad.upenn.edu/sbia/bergman
==vv ANYTHING BELOW THIS LINE WAS ADDED WITHOUT MY CONSENT OR APPROVAL vv==
------------------------------------------------------------------------------
EMC VNX: the world's simplest storage, starting under $10K
The only unified storage solution that offers unified management
Up to 160% more powerful than alternatives and 25% more efficient.
Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
