Op 20110806 om 02:40 schreef Andre Ruiz:
> On Tue, Aug 2, 2011 at 10:31, Simone Martina
> <smart...@noc.skylogicnet.com> wrote:
> > Goodevening,
> > I got a little problem: I have a bacula director on a server with two
> > NIC interfaces, each of one got a different subnet: 172.20.60.0/24 and
> > 172.20.61.0/24 and I could only use a single LTO-4 tape reader.
> > Now, the problem is howto configure storage section in director
> > configuration file, because the differnt client (from the two nets)
> > should receive two different IP to contact SD.
> >
> > Now I have tried this storage config:
> > Storage {
> > Name = TAPECORP
> > Address = 172.20.60.1
> > SDPort = 9103
> > Password = "foobar1"
> > Device = TAPE
> > Media Type = LTO-4
> > Maximum Concurrent Jobs = 20
> > }
> >
> > Storage {
> > Name = TAPECUST
> > Address = 172.20.61.1
> > SDPort = 9103
> > Password = "foobar2"
> > Device = TAPE
> > Media Type = LTO-4
> > Maximum Concurrent Jobs = 20
> > }
> >
> > 172.20.60.1 and 172.20.61.1 are, respectively, the IPs of BaculaDIR/SD
> > for each net (DIR and SD are located onto the same physical server).
> >
> > Is it the right way to configure it?
> >
> > Thanks in advance for your suggestions,
> >
> > Simone
> >
>
> Hi Simone.
>
> The way I see it, you put 0.0.0.0 on the listening IP of the daemons
> that would be receiving connections from more than one network and it
> will listen on both interfaces. If the _name_ and password of the
> other end matches, they will comunicate.
>
> I have mine set this way (and it's confirmed working), and I have a
> client in a different network (dir and sd on the same machine):
>
> In bacula-dir.conf:
>
> Director {
> ...
> DirAddress = 0.0.0.0
> DirPort = 9101
> ...
> }
>
> In bacula-sd.conf
>
> Storage {
> ...
> SDAddress = 0.0.0.0
> SDPort = 9103
> ...
> }
>
> In bacula-fd.conf:
>
> FileDaemon {
> ...
> FDAddress = 0.0.0.0
> FDport = 9102
> ...
> }
>
> These are the addresses that they will listen on, not to be confused
> with the addresses where to connect to indicated in the other daemons.
>
> Andre
>
Please allow people to read in the discussion order.
In other words: Reply _below_ the question.
Cheers
Geert Stappers
------------------------------------------------------------------------------
uberSVN's rich system and user administration capabilities and model
configuration take the hassle out of deploying and managing Subversion and
the tools developers use with it. Learn more about uberSVN and get a free
download at: http://p.sf.net/sfu/wandisco-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
