On Mon, 2011-08-08 at 04:35 -0700, lokinc wrote: > I got past that point without changing the mtx script. But now I get a > different error when running the autochanger test in btape. > > Do you wish to continue with the Autochanger test? (y/n): y > > > === Autochanger test === > > 3301 Issuing autochanger "loaded" command. > Slot 1 loaded. I am going to unload it. > 3302 Issuing autochanger "unload 1 0" command. > unload status=OK 0 > 3303 Issuing autochanger "load 1 0" command. > 3993 Bad autochanger command: /usr/libexec/bacula/mtx-changer /dev/changer > load 1 /dev/st0 0 > 3993 result="Loading media from Storage Element 1 into drive 0...done > ": ERR=Child died from signal 15: Termination > You must correct this error or the Autochanger will not work. > > Anyone know how to get rid of this problem? ---- forgetting bacula for a second... can you actually run mtx yourself?
mtx -f /dev/changer unload 1 0 I think not... sounds like there isn't any /dev/changer - try it a different way... mtx -f /dev/sg? unload 1 0 Obviously replace /dev/sg? with whichever your autoloader identifies as which should be identifiable with 'cat /proc/scsi/scsi' If that command is working outside of bacula, you should then know how to configure bacula-sd.conf which then should make the autochanger test work within bacula Craig ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA The must-attend event for mobile developers. Connect with experts. Get tools for creating Super Apps. See the latest technologies. Sessions, hands-on labs, demos & much more. Register early & save! http://p.sf.net/sfu/rim-blackberry-1 _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
