Hi folks. In my configuration I have 2 files per client. One file contains the storage definition (Archive Device) and one file contains the directory directives. I use one fileset definition named "SugarCRM_<xxxx>_Fileset" for my three backup jobs SugarCRM_xxx_Full, SugarCRM_xxx_Diff and SugarCRM_xxx_Incr where xxx is the name of the client.
When I start a Full Backup it will be terminated successfully. When I start a Differential or Incremental backup immediate following the Full backup then the Full backup won't be identified and the Differential or Incremental Backup starts a Full backup again. Does anyone know this problem? br Robert -----Original Message----- From: John Drescher [mailto:dresche...@gmail.com] Sent: Freitag, 13. Mai 2011 18:45 To: Robert Kromoser Subject: Re: Next Week I will try to look at this later today (its lunch time here in Pittsburgh PA, USA) or maybe over the weekend. You should also post this as a new question on the forum. There are other users there that can help as well.. John On Fri, May 13, 2011 at 12:36 PM, Robert Kromoser <robert.kromo...@kinamu.com> wrote: > Hi John. > > > > I have another problem but you can check it next week. > > You already have my config files. > > When I run the job SugarCRM_CCRMTEST_Full and when it's done > > then I run the job SugarCRM_CCRMTEST_Diff or SugarCRM_CCRMTEST_Incr (just > for testing it) > > then the followup Differential Job and the Incremental job don't know the > Full Backup job ran before. > > This followup job alwas says: > > > > *list jobs > > +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+ > > | JobId | Name | StartTime | Type | Level | > JobFiles | JobBytes | JobStatus | > > +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+ > > | 1 | CCRMTEST_01_Backup_Full | 2011-05-13 19:23:19 | B | F | > 8,454 | 237,029,044 | T | > > | 2 | CCRM0004_01_Backup_Full | 2011-05-13 19:23:45 | B | F > | 0 | 0 | R | > > | 3 | CCRMTEST_02_Backup_Diff | 2011-05-13 19:28:32 | B | F | > 8,454 | 237,029,043 | E | > > +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+ > > * > > > > *mess > > 13-May 19:30 CBCK0001-dir JobId 4: No prior Full backup Job record found. > > 13-May 19:30 CBCK0001-dir JobId 4: No prior or suitable Full backup found in > catalog. Doing FULL backup. > > 13-May 19:30 CBCK0001-dir JobId 4: Start Backup JobId 4, > Job=CCRMTEST_03_Backup_Incr.2011-05-13_19.30.43_11 > > 13-May 19:30 CBCK0001-dir JobId 4: Created new Volume > "Vol-CCRMTEST-Incr-0004" in catalog. > > 13-May 19:30 CBCK0001-dir JobId 4: Using Device "SugarCRM_CCRMTEST_Incr" > > 13-May 19:30 CBCK0001-sd JobId 4: Labeled new Volume > "Vol-CCRMTEST-Incr-0004" on device "SugarCRM_CCRMTEST_Incr" > (/tmp/backup/sugarcrm/CCRMTEST-fd/03_Incr). > > 13-May 19:30 CBCK0001-sd JobId 4: Wrote label to prelabeled Volume > "Vol-CCRMTEST-Incr-0004" on device "SugarCRM_CCRMTEST_Incr" > (/tmp/backup/sugarcrm/CCRMTEST-fd/03_Incr) > > 13-May 19:30 CBCK0001-dir JobId 4: Volume used once. Marking Volume > "Vol-CCRMTEST-Incr-0004" as Used. > > * > > *list jobs > > +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+ > > | JobId | Name | StartTime | Type | Level | > JobFiles | JobBytes | JobStatus | > > +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+ > > | 1 | CCRMTEST_01_Backup_Full | 2011-05-13 19:23:19 | B | F | > 8,454 | 237,029,044 | T | > > | 2 | CCRM0004_01_Backup_Full | 2011-05-13 19:23:45 | B | F > | 0 | 0 | R | > > | 3 | CCRMTEST_02_Backup_Diff | 2011-05-13 19:28:32 | B | F | > 8,454 | 237,029,043 | E | > > | 4 | CCRMTEST_03_Backup_Incr | 2011-05-13 19:30:45 | B | F > | 0 | 0 | R | > > +-------+-------------------------+---------------------+------+-------+----------+-------------+-----------+ > > * > > > > I know that is another client but I have a template for the client > configuration and so all my client > > Configurations are exactly the same except the Name, the IP-Address and the > Path Inromation for > > the bsr files. > > > > *list jobs > > +-------+-------------------------+---------------------+------+-------+----------+---------------+-----------+ > > | JobId | Name | StartTime | Type | Level | > JobFiles | JobBytes | JobStatus | > > +-------+-------------------------+---------------------+------+-------+----------+---------------+-----------+ > > | 1 | CCRMTEST_01_Backup_Full | 2011-05-13 19:23:19 | B | F | > 8,454 | 237,029,044 | T | > > | 2 | CCRM0004_01_Backup_Full | 2011-05-13 19:23:45 | B | F | > 45,570 | 2,248,140,484 | E | > > | 3 | CCRMTEST_02_Backup_Diff | 2011-05-13 19:28:32 | B | F | > 8,454 | 237,029,043 | E | > > | 4 | CCRMTEST_03_Backup_Incr | 2011-05-13 19:30:45 | B | F | > 8,454 | 237,029,044 | T | > > +-------+-------------------------+---------------------+------+-------+----------+---------------+-----------+ > > * > > As you can see there was startet the Full job first, then the Differentail > job and at least the Incrmental > > Job and always was doing a fullbackup as you can see on the JobBytes and > JobFiles. > > The error code here is just because the Scripts startet in Client Run After > Job gives a wrong > > Return code so you can foget the JobStatus E here. > > > > Br Robert > > -- John M. Drescher ------------------------------------------------------------------------------ Achieve unprecedented app performance and reliability What every C/C++ and Fortran developer should know. Learn how Intel has extended the reach of its next-generation tools to help boost performance applications - inlcuding clusters. http://p.sf.net/sfu/intel-dev2devmay _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
