James, Thank you very much for your reply. You are right. This happens when a volume is recycled. But this happens only sometimes and not all the times.
There are cases where a volume is recycled before running the job and run command is executed immediately. The problem is that bconsole does not react at all for a long time whereas in normal case bconsole reacts immediately and then indicates that a volume has been recycled. What could casue this having the same runinng conditions? Ali ----- Original Message ----- From: "James Harper" <james.har...@bendigoit.com.au> To: "Ali Reza Sajedi" <arsaj...@khanehjou.com>; "Bacula Mailingliste" <bacula-users@lists.sourceforge.net> Sent: Saturday, April 23, 2011 3:17 AM Subject: RE: [Bacula-users] bconsole delayed response > > Hello All, > > issuing run command in bconsole sometimes takes a long time, up to 20 > minutes, to respond. > > What could be the problem? > > Any hint would be highly appreciated. > If the job you are running needs a volume recycled then purging the records can take quite a while and will lock the database until it's complete. James ------------------------------------------------------------------------------ Fulfilling the Lean Software Promise Lean software platforms are now widely adopted and the benefits have been demonstrated beyond question. Learn why your peers are replacing JEE containers with lightweight application servers - and what you can gain from the move. http://p.sf.net/sfu/vmware-sfemails _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
