So... I am again a little bit further. Some paths in the configs were wrong. Also the magazines wasn`t owned by the bacula user.
I changed that so that now I am able to load the disks an let bacula write on them. But Manually! If I try to use in the bconsole "update slots" I get the following message: *update slots Automatically selected Storage: backup01 Connecting to Storage daemon backup01 at 192.168.111.2:9103 ... 3306 Issuing autochanger "slots" command. Device "usb-changer" has 0 slots. No slots in changer to scan. "label barcode" has a similar message: *label barcode Automatically selected Catalog: MyCatalog Using Catalog "MyCatalog" Automatically selected Storage: backup01 Connecting to Storage daemon backup01 at 192.168.111.2:9103 ... 3306 Issuing autochanger "slots" command. Device "usb-changer" has 0 slots. No slots in changer to scan. So, till now, I just use the "label" command and manually switch the vchanger "tapes". That works, but this is not a solution. PS.: I am using Debian Squeeze with vchanger 0.8.2 Am 10.03.2011 15:58, schrieb Soul: > Am 02.03.2011 20:32, schrieb John Drescher: >> On Wed, Mar 2, 2011 at 5:36 AM, Soul <realsoulhun...@yahoo.de> wrote: >> ... >>> Thats all...... so.. whats the Problem? >>> >> Please show the status dir and status storage >> >>> PS.: I do not use vchanger. The only comments I found about it, are 3< >>> Years old... So I thought that it is not anymore needed. >> >> That will make things more difficult.. > > After that sentence... I tried to make it myself, but with vchanger. > I really tried it with manuals! > But now... i stuck again. > > status dir and status storage shows that: > > ------------------------------------------------------------- > > status dir > debianBack-dir Version: 5.0.2 (28 April 2010) i486-pc-linux-gnu debian > squeeze/sid > Daemon started 10-Mar-11 15:36, 0 Jobs run since started. > Heap: heap=143,360 smbytes=78,348 max_bytes=118,500 bufs=298 max_bufs=316 > Incremental Backup 10 10-Mar-11 23:05 Backup > DebianFile Home > *unknown* > Full Backup 11 10-Mar-11 23:10 > BackupCatalog *unknown* > 32 Full BackupCatalog.2011-03-10_15.37.25_05 is waiting for > an > appendable Volume > 18 Full 547 22.94 G OK 07-Mar-11 23:15 > Backup_DebianFile_Home > 19 Full 1 143.9 K OK 07-Mar-11 23:15 > BackupCatalog > 20 Incr 5 1.465 G OK 08-Mar-11 23:05 > Backup_DebianFile_Home > 21 Full 1 150.5 K OK 08-Mar-11 23:10 > BackupCatalog > 24 Full 1 51.33 K OK 10-Mar-11 12:53 > BackupCatalog > 25 Full 0 0 Cancel 10-Mar-11 13:00 > Backup_DebianFile_Home > 26 Full 0 0 Error 10-Mar-11 13:52 > BackupCatalog > 28 Full 0 0 Cancel 10-Mar-11 14:49 > BackupCatalog > 30 Full 0 0 Error 10-Mar-11 15:21 > BackupCatalog > 31 Full 0 0 Error 10-Mar-11 15:36 > BackupCatalog > ==== > > status storage > Automatically selected Storage: backup01 > > DebianXen-sd Version: 5.0.2 (28 April 2010) x86_64-pc-linux-gnu debian > squeeze/sid > Daemon started 10-Mär011 15:36, 0 Jobs run since started. > Heap: heap=446,464 smbytes=158,711 max_bytes=158,905 bufs=111 max_bufs=113 > Sizes: boffset_t=8 size_t=8 int32_t=4 int64_t=8 > > Running Jobs: > Writing: Full Backup job BackupCatalog JobId=32 Volume="" > pool="Default" device="usb-changer-backup01" > (/home/backup/backup01/0/drive0) > spooling=0 despooling=0 despool_wait=0 > Files=0 Bytes=0 Bytes/sec=0 > FDReadSeqNo=6 in_msg=6 out_msg=4 fd=6 > ==== > > Jobs waiting to reserve a drive: > ==== > > Terminated Jobs: > JobId Level Files Bytes Status Finished Name > =================================================================== > 19 Full 1 144.0 K OK 07-Mär011 23:15 BackupCatalog > 20 Incr 5 1.465 G OK 08-Mär011 23:05 > Backup_DebianFile_Home > 21 Full 1 150.6 K OK 08-Mär011 23:10 BackupCatalog > 22 Incr 0 0 Cancel 10-Mär011 09:39 > Backup_DebianFile_Home > 24 Full 1 51.44 K OK 10-Mär011 12:53 BackupCatalog > 25 Full 355 9.071 G Cancel 10-Mär011 13:00 > Backup_DebianFile_Home > 26 Full 0 0 Cancel 10-Mär011 13:52 BackupCatalog > 28 Full 0 0 Cancel 10-Mär011 15:21 BackupCatalog > 27 Full 0 0 Cancel 10-Mär011 15:21 BackupCatalog > 31 Full 0 0 Cancel 10-Mär011 15:36 BackupCatalog > ==== > > Device status: > Autochanger "usb-changer" with devices: > "usb-changer-backup01" (/home/backup/backup01/0/drive0) > Device "usb-changer-backup01" (/home/backup/backup01/0/drive0) is not open. > Device is BLOCKED waiting to create a volume for: > Pool: Default > Media type: File > Drive 0 status unknown. > ==== > > Used Volume status: > ==== > > ==== > > ----------------------------------------------------- > > So far... I understand that i made something wrong... > Also I saw that drive0 does not exist.. in a earlier test, i somehow > made it. But i don’t know how... > > > What is it??? > > ------------------------------------------------------------------------------ > Colocation vs. Managed Hosting > A question and answer guide to determining the best fit > for your organization - today and in the future. > http://p.sf.net/sfu/internap-sfd2d > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users > ------------------------------------------------------------------------------ Colocation vs. Managed Hosting A question and answer guide to determining the best fit for your organization - today and in the future. http://p.sf.net/sfu/internap-sfd2d _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
