On Thu, Feb 3, 2011 at 2:52 PM, Jeremiah D. Jester <jj...@u.washington.edu> wrote: > John, > > When I try to 'mount' the volume again to load the requested tape I get the > following error: "3001 OK mount requested. Specified slot ignored. > Device="Drive1" (/dev/nst0)". Then I get several messages in the console > asking me to 'mount' the volume I just mounted (located in slot 12, volume > 51L4). Here are the commands I'm issuing. >
Can you try loading the tape using the autochanger front pannel. Then update slots in bacula. Then mount in bacula. And see if that works. If not try Alan's suggestion of mounting the wrong tape from bconsole. John ------------------------------------------------------------------------------ The modern datacenter depends on network connectivity to access resources and provide services. The best practices for maximizing a physical server's connectivity to a physical network are well understood - see how these rules translate into the virtual world? http://p.sf.net/sfu/oracle-sfdevnlfb _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
