Hi Dan, Two tape test with two different tapes or with only one?
The two tape test with the same tape works ok (all "This is correct!") Other problem I see is the media use: | 11 | Completo01-01 | Full | 1 | 190,149,249,024 | 191 | 4,320,000 | 1 | 0 | 0 | Ultrium | 2010-09-24 00:30:59 | 12 | Completo01-02 | Full | 1 | 191,598,317,568 | 192 | 4,320,000 | 1 | 0 | 0 | Ultrium | 2010-09-24 13:42:15 | The last Full Backup that works only use 190Gb of space for each tape (three tapes needed for 750Gb of data aprox.- I use FD compression) Are the LTO3 medium corrupt or bad? It's possible to test all the tape for errors like fsck or similar? Thanks. Javier 2010/12/1 Dan Langille <d...@langille.org>: > On 11/30/2010 7:03 PM, Francisco Javier Funes Nieto wrote: >> >> Hi all, >> >>> From one month ago I've (rare) errors in one of my Bacula installation >> >> with the Full Backups onto HP StorageWorks 920 LTO3 tapedrive (SCSI) >> >> The Full Backup takes three LTO3 tapes (+/- 750GB) but with the first >> or second tape the tapedrive goes offline with the following error in >> /var/log/messages: >> >> Nov 30 22:58:50 goliat kernel: [121427.669048] >> SIMODE0[0xc]:(ENOVERRUN|ENIOERR) >> Nov 30 22:58:50 goliat kernel: [121427.669053] CCSCBCTL[0x4]:(CCSCBDIR) >> Nov 30 22:58:50 goliat kernel: [121427.669063] scsi1: REG0 == 0xaee0, >> SINDEX = 0x113, DINDEX = 0x108 >> Nov 30 22:58:50 goliat kernel: [121427.669071] scsi1: SCBPTR == 0x2, >> SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff80 >> Nov 30 22:58:50 goliat kernel: [121427.669080] CDB 0 0 0 0 0 0 >> Nov 30 22:58:50 goliat kernel: [121427.669081] STACK: 0x0 0x0 0x0 0x0 >> 0x0 0x0 0x0 0x0 >> Nov 30 22:58:50 goliat kernel: [121427.669106]<<<<<<<<<<<<<<<<< Dump >> Card State Ends>>>>>>>>>>>>>>>>>> >> Nov 30 22:59:00 goliat kernel: [121438.298052] st 1:0:3:0: Device >> offlined - not ready after error recovery >> Nov 30 22:59:00 goliat kernel: [121438.298073] st0: Error 70000 (sugg. >> bt 0x0, driver bt 0x0, host bt 0x7). >> >> This is the Bacula output: >> >> 30-Nov 22:59 goliat-sd JobId 515: Error: Error writing final EOF to >> tape. This Volume may not be readable. >> dev.c:1745 ioctl MTWEOF error on "Ultrium" (/dev/nst0). ERR=Error de >> entrada/salida. >> 30-Nov 22:59 goliat-sd JobId 515: Job write elapsed time = 21:38:17, >> Transfer rate = 3.259 M Bytes/second >> 30-Nov 22:59 goliat-fd JobId 515: Fatal error: backup.c:1019 Network >> send error to SD. ERR=Connection reset by peer >> 30-Nov 22:59 goliat-dir JobId 515: Error: Bacula goliat-dir 5.0.2 >> (28Apr10): 30-Nov-2010 22:59:10 >> >> >> I don't know if is a medium error, a tapedrive related error or scsi card >> error. >> >> Someone found similar error or behaviour in their Bacula installations? >> >> I use bacula 5.0.2 over Debian Lenny 64bits. > > Have you run the btape test with this tape drive and done a two tape test? > NOTE: this will destroy any data on the tapes and requires a tape in the > drive (and in slot 1 if you are using an autochanger during the test). > > -- > Dan Langille - http://langille.org/ > -- _____________________________________________ Francisco Javier Funes Nieto [esen...@gmail.com] CANONIGOS Servicios Informáticos para PYMES. Cl. Cruz 2, 1º Oficina 7 Tlf: 958.536759 / 661134556 Fax: 958.521354 GRANADA - 18002 ------------------------------------------------------------------------------ Increase Visibility of Your 3D Game App & Earn a Chance To Win $500! Tap into the largest installed PC base & get more eyes on your game by optimizing for Intel(R) Graphics Technology. Get started today with the Intel(R) Software Partner Program. Five $500 cash prizes are up for grabs. http://p.sf.net/sfu/intelisp-dev2dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
