On Mon, Nov 1, 2010 at 11:58 AM, eliassal
<bacula-fo...@backupcentral.com> wrote:
> Hi, I tried to follow your instructions but getting the following error
>
>
>
>> .. the backup job is now running. When complete, the results will be shown
>> below ..
>> 01-Nov 16:45 bacula-dir JobId 17: Start Backup JobId 17,
>> Job=jobFC13OnIomega1.2010-11-01_16.45.24_06
>> 01-Nov 16:45 bacula-sd JobId 17: Fatal error: Device reservation failed for
>> JobId=17:
>> 01-Nov 16:45 bacula-dir JobId 17: Fatal error:
>> Storage daemon didn't accept Device "DRRemotedevice" because:
>> 3924 Device "DRRemotedevice" not in SD Device resources.
>> 01-Nov 16:45 bacula-dir JobId 17: Error: Bacula bacula-dir 5.0.2 (28Apr10):
>> 01-Nov-2010 16:45:26
>> Build OS: x86_64-redhat-linux-gnu redhat
>> JobId: 17
>> Job: jobFC13OnIomega1.2010-11-01_16.45.24_06
>> Backup Level: Full
>> Client: "bacula-fd" 5.0.2 (28Apr10)
>> x86_64-redhat-linux-gnu,redhat,
>> FileSet: "AllFC13" 2010-10-31 14:16:18
>> Pool: "DRRemotepool" (From Job resource)
>> Catalog: "MyCatalog" (From Client resource)
>> Storage: "File1" (From Job resource)
>> Scheduled time: 01-Nov-2010 16:45:24
>> Start time: 01-Nov-2010 16:45:26
>> End time: 01-Nov-2010 16:45:26
>> Elapsed time: 0 secs
>> Priority: 10
>> FD Files Written: 0
>> SD Files Written: 0
>> FD Bytes Written: 0 (0 B)
>> SD Bytes Written: 0 (0 B)
>> Rate: 0.0 KB/s
>> Software Compression: None
>> VSS: no
>> Encryption: no
>> Accurate: no
>> Volume name(s):
>> Volume Session Id: 1
>> Volume Session Time: 1288626300
>> Last Volume Bytes: 0 (0 B)
>> Non-fatal FD errors: 0
>> SD Errors: 0
>> FD termination status:
>> SD termination status:
>> Termination: *** Backup Error ***
>
>
>
> Here is my bacula-dir file
>
>>
>> #
>> # Default Bacula Storage Daemon Configuration file
>> #
>> # For Bacula release 5.0.2 (28 April 2010) -- redhat
>> #
>> # You may need to change the name of your tape drive
>> # on the "Archive Device" directive in the Device
>> # resource. If you change the Name and/or the
>> # "Media Type" in the Device resource, please ensure
>> # that dird.conf has corresponding changes.
>> #
>>
>> Storage { # definition of myself
>> Name = bacula-sd
>> SDPort = 9103 # Director's port
>> WorkingDirectory = "/var/spool/bacula"
>> Pid Directory = "/var/run"
>> Maximum Concurrent Jobs = 20
>> }
>>
>> #
>> # List Directors who are permitted to contact Storage daemon
>> #
>> Director {
>> Name = bacula-dir
>> Password = "123456"
>> }
>>
>> #
>> # Restricted Director, used by tray-monitor to get the
>> # status of the storage daemon
>> #
>> Director {
>> Name = bacula-mon
>> Password = "123456"
>> Monitor = yes
>> }
>>
>> #
>> # Note, for a list of additional Device templates please
>> # see the directory <bacula-source>/examples/devices
>> # Or follow the following link:
>> #
>> http://bacula.svn.sourceforge.net/viewvc/bacula/trunk/bacula/examples/devices/
>> #
>>
>> #
>> # Devices supported by this Storage daemon
>> # To connect, the Director's bacula-dir.conf must have the
>> # same Name and MediaType.
>> #
>>
>> Device {
>> Name = FileStorage
>> Media Type = File
>> Archive Device = /media/Backup
>> LabelMedia = yes; # lets Bacula label unlabeled media
>> Random Access = Yes;
>> AutomaticMount = yes; # when device opened, read it
>> RemovableMedia = no;
>> AlwaysOpen = no;
>> }
>> Device {
>> Name = DRRemotedevice
>> Archive Device = /mnt/publiciomega1/SalamLinux/BackupFC13
>> Media Type = File1
>> LabelMedia = yes
>> Random Access = yes
>> AutomaticMount = yes
>> RemovableMedia = no
>> AlwaysOpen = no
>> }
>> #
>> # An autochanger device with two drives
>> #
>> #Autochanger {
>> # Name = Autochanger
>> # Device = Drive-1
>> # Device = Drive-2
>> # Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
>> # Changer Device = /dev/sg0
>> #}
>>
>> #Device {
>> # Name = Drive-1 #
>> # Drive Index = 0
>> # Media Type = DLT-8000
>> # Archive Device = /dev/nst0
>> # AutomaticMount = yes; # when device opened, read it
>> # AlwaysOpen = yes;
>> # RemovableMedia = yes;
>> # RandomAccess = no;
>> # AutoChanger = yes
>> # #
>> # # Enable the Alert command only if you have the mtx package loaded
>> # # Note, apparently on some systems, tapeinfo resets the SCSI controller
>> # # thus if you turn this on, make sure it does not reset your SCSI
>> # # controller. I have never had any problems, and smartctl does
>> # # not seem to cause such problems.
>> # #
>> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>> # If you have smartctl, enable this, it has more info than tapeinfo
>> # Alert Command = "sh -c 'smartctl -H -l error %c'"
>> #}
>>
>> #Device {
>> # Name = Drive-2 #
>> # Drive Index = 1
>> # Media Type = DLT-8000
>> # Archive Device = /dev/nst1
>> # AutomaticMount = yes; # when device opened, read it
>> # AlwaysOpen = yes;
>> # RemovableMedia = yes;
>> # RandomAccess = no;
>> # AutoChanger = yes
>> # # Enable the Alert command only if you have the mtx package loaded
>> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>> # If you have smartctl, enable this, it has more info than tapeinfo
>> # Alert Command = "sh -c 'smartctl -H -l error %c'"
>> #}
>>
>> #
>> # A Linux or Solaris LTO-2 tape drive
>> #
>> #Device {
>> # Name = LTO-2
>> # Media Type = LTO-2
>> # Archive Device = /dev/nst0
>> # AutomaticMount = yes; # when device opened, read it
>> # AlwaysOpen = yes;
>> # RemovableMedia = yes;
>> # RandomAccess = no;
>> # Maximum File Size = 3GB
>> ## Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
>> ## Changer Device = /dev/sg0
>> ## AutoChanger = yes
>> # # Enable the Alert command only if you have the mtx package loaded
>> ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>> ## If you have smartctl, enable this, it has more info than tapeinfo
>> ## Alert Command = "sh -c 'smartctl -H -l error %c'"
>> #}
>>
>> #
>> # A Linux or Solaris LTO-3 tape drive
>> #
>> #Device {
>> # Name = LTO-3
>> # Media Type = LTO-3
>> # Archive Device = /dev/nst0
>> # AutomaticMount = yes; # when device opened, read it
>> # AlwaysOpen = yes;
>> # RemovableMedia = yes;
>> # RandomAccess = no;
>> # Maximum File Size = 4GB
>> ## Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
>> ## Changer Device = /dev/sg0
>> ## AutoChanger = yes
>> # # Enable the Alert command only if you have the mtx package loaded
>> ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>> ## If you have smartctl, enable this, it has more info than tapeinfo
>> ## Alert Command = "sh -c 'smartctl -H -l error %c'"
>> #}
>>
>> #
>> # A Linux or Solaris LTO-4 tape drive
>> #
>> #Device {
>> # Name = LTO-4
>> # Media Type = LTO-4
>> # Archive Device = /dev/nst0
>> # AutomaticMount = yes; # when device opened, read it
>> # AlwaysOpen = yes;
>> # RemovableMedia = yes;
>> # RandomAccess = no;
>> # Maximum File Size = 5GB
>> ## Changer Command = "/usr/libexec/bacula/mtx-changer %c %o %S %a %d"
>> ## Changer Device = /dev/sg0
>> ## AutoChanger = yes
>> # # Enable the Alert command only if you have the mtx package loaded
>> ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
>> ## If you have smartctl, enable this, it has more info than tapeinfo
>> ## Alert Command = "sh -c 'smartctl -H -l error %c'"
>> #}
>>
>>
>>
>>
>> #
>> # A FreeBSD tape drive
>> #
>> #Device {
>> # Name = DDS-4
>> # Description = "DDS-4 for FreeBSD"
>> # Media Type = DDS-4
>> # Archive Device = /dev/nsa1
>> # AutomaticMount = yes; # when device opened, read it
>> # AlwaysOpen = yes
>> # Offline On Unmount = no
>> # Hardware End of Medium = no
>> # BSF at EOM = yes
>> # Backward Space Record = no
>> # Fast Forward Space File = no
>> # TWO EOF = yes
>> # If you have smartctl, enable this, it has more info than tapeinfo
>> # Alert Command = "sh -c 'smartctl -H -l error %c'"
>> #}
>>
>> #
>> # Send all messages to the Director,
>> # mount messages also are sent to the email address
>> #
>> Messages {
>> Name = Standard
>> director = bacula-dir = all
>> }
>
This looks like a bacula-sd.conf not a bacula-dir.conf. Can you post
the storage resource for DRRemotedevice from your bacula-dir.conf
John
------------------------------------------------------------------------------
Nokia and AT&T present the 2010 Calling All Innovators-North America contest
Create new apps & games for the Nokia N8 for consumers in U.S. and Canada
$10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing
Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store
http://p.sf.net/sfu/nokia-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
