On 09/07/10 11:09, Eduardo Júnior wrote: > Hi, > > > 2010/9/6 John Drescher<dresche...@gmail.com>: >> 2010/9/6 Eduardo Júnior<ihtrau...@gmail.com>: >>> Hi, >>> >>> >>> I use bacula-director 2.4.4 on Debian Lenny Box. >>> >>> Why after a restart or reload of the daemon director >>> (/etc/init.d/bacula-director) >>> all jobs running are lost? >>> >>> Is it possible avoid this? >> Why are you restarting the director when jobs are running. Do not do >> that. If you changed the configuation and want to apply that use the >> reload command in bacula. Make sure you test your config file first >> with >> >> bacula-dir -t /etc/bacula/bacula-dir.conf > This isn' usually, restart the director when jobs are running. > Sometimes in the evening I need do changes and I have an > interval time do re-running jobs that were lost. > > So, reload command is sufficient and the jobs in execution will > no be lost? > > Thanks, > Correct, running jobs will not be lost and their execution will not be stopped when you use the reload command. However, keep in mind John's comment about testing the config with 'bacula-dir -t' first - a config error will result in the director crashing when you issue the reload command.
------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
