Hello Steve Thanks. Tapeinfo output is on my first message (as well as other troubleshooting info). It says 'DataCompEnabled: yes'.
Cheers, Rodrigo -----Mensagem original----- De: Steve Ellis [mailto:el...@brouhaha.com] Enviada em: quarta-feira, 1 de setembro de 2010 14:48 Para: bacula-users@lists.sourceforge.net Assunto: Re: [Bacula-users] RES: LTO-3 tape not compressing data/premature end of tape space On 9/1/2010 7:09 AM, Brian Debelius wrote: > Is Maximum Volume Bytes set in the catalog for these tapes? > > On 9/1/2010 9:15 AM, Rodrigo Ferraz wrote: >> Certainly. The schedule comprises 6 different tapes, between monthly and >> weekly pools, and the problem is exactly the same with all of them. >> >> Rodrigo >> If you have the 'tapeinfo' command you can also check to see if the generic SCSI device has HW compression enabled (shows up as DataCompEnabled in my environment). -se ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
