On 07/14/10 18:54, Jeremiah D. Jester wrote: > I keep on getting this error message despite having additional appendable > tapes in my offsite pool. > > 14-Jul 15:34 bacula01-sd JobId 323: Please mount Volume "KL0339" or label a > new one for: > Job: baretta-offsite.2010-07-13_01.00.00_17 > Storage: "Drive1" (/dev/st0) > Pool: Offsite > Media type: LTO2 > > > When I issue a 'status slots' and explicitly mount KL0339 volume it loads the > wrong tape (slot 1, instead of slot 2). This seems very whacky. Output > below...
JJ, try issuing the "update slots" command. This will cause Bacula to request from the library which tape is currently in which slot and it will then update the database for the media accordingly. You have already shown the output of the "status slots" command, when you run the "update slots" command you can compare. You might also want to create a job of type "Admin" that just runs the "update slots" command prior to your nightly backups (same time, higher priority). This way you don't have to worry about remembering to run that command when you need to manually remove/rotate tapes on a cycle. Hope this helps. -- Bill Arlofski Reverse Polarity, LLC ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
