> > > My guess is you do not have the sas driver loaded. > > I forgot to comment this, but the SAS RAID controller card is recognized > by the operating system: > > ------------------------------------------------------------------------ > ackup:~# lspci -vvv -s 02:00.0 > 02:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6 > controllers (rev 01) > Subsystem: Hewlett-Packard Company Smart Array P212
Contrary to my previous post, that device does indeed claim specific support for the autoloader you are using, although the autoloader quickspecs state that using it on a RAID controller is not recommended. Please check that any BIOS options for supporting tape drive passthrough on the RAID controller are enabled Also make sure you have enabled the kernel driver tape drive support option for that the RAID controller (CONFIG_CISS_SCSI_TAPE=y in your kernel .config) James ------------------------------------------------------------------------------ ThinkGeek and WIRED's GeekDad team up for the Ultimate GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the lucky parental unit. See the prize list and enter to win: http://p.sf.net/sfu/thinkgeek-promo _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
