The loader is set to Random. It looks more like to me an issue with mtx and
the mtx-changer script. Like i said, it will write for client1-job1, then
it goes to client2-job1 it will move the tape to slot 1 then it won't bring
it back. I want the tape to continue to fill until it's full. If it's not
full and I remove it, then it goes to the next tape.
On Wed, Jun 9, 2010 at 4:12 PM, Jason A. Kates <ja...@kates.org> wrote:
> I have had luck with a Quantum Superloader 3 in the past. Can you let
> me know what mode the loader is set to (it should be set to Random).
>
> Thanks -Jason
>
>
> On Wed, 2010-06-09 at 15:02 -0400, bwellsnc wrote:
> > OS: CentOS 5.5
> > Bacula Version: 5.0.2
> >
> >
> > Hello. I am able to write data to my quantum superloader 3 only by
> > basically moving the tape manually and disabling the autochanger.
> > Here is the situation. This unit has an 8 tape magazine. I have a
> > tape in SLOT 1. When I attempt to run a backup job to tape, I receive
> > the below error:
> >
> >
> > 3302 Autochanger "loaded? drive 0", result: nothing loaded.
> > 09-Jun 14:38 servername-sd JobId 496: 3301 Issuing autochanger
> > "loaded? drive 0" command.
> > *messages
> > 09-Jun 14:38 servername-sd JobId 496: 3302 Autochanger "loaded? drive
> > 0", result: nothing loaded.
> >
> >
> > It repeats several times, then states I have to load a tape manually
> > that matches the label it’s looking for. The tape is labeled and has
> > been written to. I know this because I disabled the autochanger
> > function and made it a straight tape drive for testing. I have gone
> > through everything concerning this unit in the mailing list. Everyone
> > says it works, but I am unable to get it to work with the
> > autochanger. Also, I noticed that when it starts a backup if I have a
> > tape in the drive, it takes the tape out and cannot find the tape. I
> > then get the error above.
> >
> >
> > I want to backup to the tape until it is full. This is for a one time
> > backup I perform weekly. I just want to append to the tape until I
> > need to send the tape offsite at the beginning of the month. Then I
> > will start with a fresh tape.
> >
> >
> > If anyone can help, I would appreciate it.
> >
> >
> > Thanks!
> >
> >
> > Brent
> >
> >
> >
> >
> >
> ------------------------------------------------------------------------------
> > ThinkGeek and WIRED's GeekDad team up for the Ultimate
> > GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
> > lucky parental unit. See the prize list and enter to win:
> > http://p.sf.net/sfu/thinkgeek-promo
> > _______________________________________________ Bacula-users mailing list
> Bacula-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bacula-users
>
>
> --
>
> ----------------------------------------------------------------------------
> Jason A. Kates (ja...@kates.org)
> Fax: 208-975-1514
> Phone: 660-960-0070
>
> ============================================================================
>
>
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
