Forgot to include this as well...
*list volumes
Pool: Onsite
No results to list.
Pool: Catalog
No results to list.
Pool: Offsite
+---------+---------------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
| MediaId | VolumeName | VolStatus | Enabled | VolBytes | VolFiles |
VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten |
+---------+---------------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
| 1 | Offsite-vol3-6-9-10 | Append | 1 | 193,536 | 2 |
15,120,000 | 1 | 10 | 1 | LTO2 | 2010-06-09 10:17:42 |
| 2 | vol-6-9-10-1040am | Append | 1 | 64,512 | 0 |
15,120,000 | 1 | 0 | 0 | LTO2 | 0000-00-00 00:00:00 |
+---------+---------------------+-----------+---------+----------+----------+--------------+---------+------+-----------+-----------+---------------------+
Thanks,
JJ
From: Jeremiah D. Jester
Sent: Wednesday, June 09, 2010 10:51 AM
To: bacula-users@lists.sourceforge.net
Subject: cannot find appendable volumes
Hello,
Another question to the list. Every time I run a backup of I client I get a
similar message to the below...
09-Jun 10:43 bacula01-sd JobId 3: Job kojak-onsite.2010-06-09_10.19.21_06 is
waiting. Cannot find any appendable volumes.
Please use the "label" command to create a new Volume for:
Storage: "Drive1" (/dev/st0)
Pool: Onsite
Media type: LTO2
I then create issue a 'label' cmd and go through the steps. And am told that
there is already a volume loaded.
*label
The defined Storage resources are:
1: File
2: Tape
Select Storage resource (1-2): 2
Enter autochanger drive[0]: 0
Enter new Volume name: testvol-6-9-10
Enter slot (0 or Enter for none):
Defined Pools:
1: Onsite
2: Catalog
3: Offsite
4: Scratch
Select the Pool (1-4): 1
Connecting to Storage daemon Tape at bacula.microslu.washington.edu:9103 ...
Sending label command for Volume "testvol-6-9-10" Slot 0 ...
Invalid slot=0 defined in catalog for Volume "" on "Drive1" (/dev/st0). Manual
load may be required.
3920 Cannot label Volume because it is already labeled: "vol-6-9-10-1040am"
Label command failed for Volume testvol-6-9-10.
Do not forget to mount the drive!!!
The volume already loaded says 'Append' and not full so why am I being prompted
to change the tape? Ideally, I would like to add several tapes to a backup Pool
and the have Bacula overwrite data on each volume as needed w/o having to
load/unload tapes. Note, this is a tape robot (ADIC Scalar 24) and has an auto
changer mechanism.
Appreciate the help!
Thanks.
Jeremiah Jester
Senior Informatics Specialist
Microbiology, Katze Lab
Box 357242
P: 206-732-6185
------------------------------------------------------------------------------
ThinkGeek and WIRED's GeekDad team up for the Ultimate
GeekDad Father's Day Giveaway. ONE MASSIVE PRIZE to the
lucky parental unit. See the prize list and enter to win:
http://p.sf.net/sfu/thinkgeek-promo
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
