On 27/05/2010, at 01.34, randa...@bioinfo.wsu.edu wrote: > I have been using bacula for some time with an overland neo 2000. > > However, Sometimes I receive these errors: > > You have messages. > *messages > 26-May 16:07 mlbkp1-sd JobId 3152: 3304 Issuing autochanger "load > slot 17, drive 0" command. > 26-May 16:08 mlbkp1-sd JobId 3152: 3305 Autochanger "load slot 17, > drive 0", status is OK. > 26-May 16:08 mlbkp1-sd JobId 3152: Please mount Volume "000068L3" or > label a new one for: > Job: FS1_Data_Home_Dirs.2010-05-26_16.07.00_04 > Storage: "neodrive-1" (/dev/st0) > Pool: Mainlab-six-month-pool-incremental > Media type: Ultrium-3 > > Clearly the tap changer has loaded the tape into drive 0 from slot > 17, which I have verified actually does have volume 000068L3. > > So why does it say please mount volume or label a new one? Why does > it keep saying this despite the fact the tape is loaded in the drive? > > Anyone know why. Typically, I just label a new tape, and that fixes > the problem, but why the hell does it not just use the tape that it > loaded into the drive in the first place instead of complaining > about it.
Try to modify the mtx-changer script and add a " sleep 10" after the mtx load command. Some libraries return ón the mtx command before the tape is fully ready Jesper ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
