Has anyone used Migration with Bacula 3.0.2? The job migrated from tape to disk doesn't seem to exist. The original job, now marked 'M', is now longer migratable.
What I am trying to do is: Migrate old Full backups from tape to disk, then migrate them on to new tapes for archiving. The old tapes are no longer in the catalog so I need to bscan them back into the catalog before migration. It's a slow process, and each job will take two days to complete. Not really sure what to try next. Anyone? Any ideas? > -----Original Message----- > From: Ken Barclay [mailto:ken.barc...@qbmore.com] > Sent: Wednesday, 12 May 2010 1:11 PM > To: Bacula-users@lists.sourceforge.net > Subject: [Bacula-users] Bscan - No results to list > > Hi, > > Yesterday afternoon I managed to successfully run my first Migration > Job from Tape to Disk, all went well (see email output below). After > the job had completed, I used bconsole query 'List Jobs stored on a > selected MediaId' to check that the data was now on the new Disk > storage, it was all there, Great! > > The plan for today was to Migrate that same data from Disk to a new > Tape. But, alas, when I ran the same bconsole query as yesterday it > said "No results to list." I assume this happened because I had left > Recycle and AutoPrune for the new Disk Pool on the default values. > > Okay, I thought, not a problem, I can just bscan the Disk Volume and > have the data put back in the catalog, then I can continue with today's > plan. > > Here's the output from bscan: > > [r...@svr03 sbin]# ./bscan -s -m -c /etc/bacula/bacula-sd.conf -v -V > File-0001 /vmtmp/BaculaStore > > bscan: butil.c:282 Using device: "/vmtmp/BaculaStore" for reading. > > 12-May 09:36 bscan JobId 0: Ready to read from volume "File-0001" on > device "Disk" (/vmtmp/BaculaStore). > > bscan: bscan.c:309 Using Database: bacula, User: bacula > > bscan: bscan.c:451 Pool record for Mig2Disk found in DB. > > bscan: bscan.c:465 Pool type "Backup" is OK. > > bscan: bscan.c:475 Media record for File-0001 found in DB. > > bscan: bscan.c:493 Media type "Disk" is OK. > > bscan: bscan.c:503 VOL_LABEL: OK for Volume: File-0001 > > bscan: bscan.c:521 SOS_LABEL: Found Job record for JobId: 22760 > > bscan: bscan.c:689 32,768 file records. At file:blk=1:3,500,211,336 > bytes=7,790,769,568 > > bscan: bscan.c:689 65,536 file records. At file:blk=1:4,158,362,662 > bytes=8,448,604,989 > > bscan: bscan.c:1037 Fileset "Zabbix162 Set" already exists. > > bscan: bscan.c:1152 Could not update JobId=10293 record. > ERR=sql_update.c:196 Update failed: affected_rows=0 for UPDATE Job SET > JobStatus='T',EndTime='2009-07-29 > 22:19:12',ClientId=24,JobBytes=8885378522,ReadBytes=0,JobFiles=71721,Jo > bErrors=0,VolSessionId=1,VolSessionTime=1273565665,PoolId=12,FileSetId= > 81,JobTDate=1248880752,RealEndTime='2009-07-29 22:19:12',PriorJobId=0 > WHERE JobId=10293 > > bscan: bscan.c:1250 Created JobMedia record JobId 10293, MediaId 84 > > 12-May 09:44 bscan JobId 0: End of Volume at file 2 on device "Disk" > (/vmtmp/BaculaStore), Volume "File-0001" > > bscan: bscan.c:338-10293 ========== JobId=0 ======== > > bscan: bscan.c:970 Updated Media record at end of Volume: File-0001 > > 12-May 09:44 bscan JobId 0: End of all volumes. > > bscan: bscan.c:970 Updated Media record at end of Volume: File-0001 > > bscan: bscan.c:638 End of all Volumes. VolFiles=2 VolBlocks=0 > VolBytes=8,889,199,325 > > Records added or updated in the catalog: > > 1 Media > > 1 Pool > > 1 Job > > 71721 File > > > > That looks to be ok. But when I run the bconsole query again on both > the mediaid and Volume name, I get: > > No results to list. > > * > > Why? > > And from the command-line: > > [r...@svr03 sbin]# ll /vmtmp/BaculaStore/ > > total 8694208 > > -rw-r----- 1 bacula disk 8894162049 May 11 15:47 File-0001 > > > > Also of note, or perhaps an offer of some kind of explanation: Before > running the Migration Job yesterday, I needed to bscan the Tape as it > had long passed its retention period. That was ok and the tape had > about 15 jobs put back into the catalog. Today, not surprisingly, all > of those jobs had been pruned from the catalog except for the Job which > had been migrated, which is now marked as type M. > > Can anybody offer any explanation as to why there are 'No results to > list' after today's bscan? > > What did I miss, or misunderstand? > > Email output from the Migration Job: > > 11-May 15:17 KenTest-dir JobId 22769: The following 1 JobId was chosen > to be migrated: 22760 11-May 15:17 KenTest-dir JobId 22769: Migration > using JobId=22760 Job=Zabbix162.2009-07-29_22.00.27 11-May 15:17 > KenTest-dir JobId 22769: Bootstrap records written to > /var/lib/bacula/KenTest-dir.restore.1.bsr > > 11-May 15:17 KenTest-dir JobId 22769: Start Migration JobId 22769, > Job=MigrateTapeToDisk.2010-05-11_15.17.04_03 > > 11-May 15:17 KenTest-dir JobId 22769: Using Device "Disk" > > 11-May 15:17 KenTest-sd JobId 22769: Ready to read from volume > "000031L3" on device "FileStorage" (/dev/tape). > > 11-May 15:17 KenTest-sd JobId 22769: Wrote label to prelabeled Volume > "File-0001" on device "Disk" (/vmtmp/BaculaStore) 11-May 16:07 KenTest- > dir JobId 22769: Bacula KenTest-dir 3.0.2 (18Jul09): 11-May-2010 > 16:07:40 > > Build OS: x86_64-redhat-linux-gnu redhat > > Prev Backup JobId: 22760 > > Prev Backup Job: Zabbix162.2009-07-29_22.00.27 > > New Backup JobId: 22770 > > Current JobId: 22769 > > Current Job: MigrateTapeToDisk.2010-05-11_15.17.04_03 > > Backup Level: Full > > Client: Zabbix-1.6-fd > > FileSet: "Zabbix162 Set" 2010-01-29 22:00:00 > > Read Pool: "Monthly" (From Job resource) > > Read Storage: "File" (From Job resource) > > Write Pool: "Mig2Disk" (From Job Pool's NextPool > resource) > > Write Storage: "Disk" (From Storage from Pool's NextPool > resource) > > Catalog: "MyCatalog" (From Client resource) > > Start time: 11-May-2010 15:17:08 > > End time: 11-May-2010 16:07:40 > > Elapsed time: 50 mins 32 secs > > Priority: 10 > > SD Files Written: 71,721 > > SD Bytes Written: 8,885,378,522 (8.885 GB) > > Rate: 2930.5 KB/s > > Volume name(s): File-0001 > > Volume Session Id: 1 > > Volume Session Time: 1273565665 > > Last Volume Bytes: 8,894,162,049 (8.894 GB) > > SD Errors: 0 > > SD termination status: OK > > Termination: Migration OK > > > > Thanks in advance, > > Ken Barclay > >
------------------------------------------------------------------------------
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
------------------------------------------------------------------------------
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
