Am Freitag, den 14.05.2010, 11:28 -0400 schrieb taisgeal: > However, for the life of me, I cannot see how to move a tape from the MSL > 6000 drive back to the slot from which it was taken, once the backup job is > finished. This is not a problem for me during the week. However, I change my > tapes every Friday and I have to stop the bacula-sd daemon on server2 and > then manually move it using the front panel on the MSL 6000. After that, I > start up the bacula-sd daemon again on server2 and I am back in business. i > never have to go anywhere near server1. Do you mean, that the tape should be put to the i/o slot or do you just want bacula to use a new tape every friday? For the later you could play with the "Volume Use Duration" parameter. If you want to sort the tape out to the i/o slot, you have to write a little script for that, I've done sth. like that already.
Regards -- Peter Allgeyer Salzburg|Research Forschungsgesellschaft mbH Dipl.-Inform. Univ. Jakob-Haringer-Strasse 5/III phone +43.662.2288-264 5020 Salzburg | Austria fax +43.662.2288-222 http://www.salzburgresearch.at ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
