On 24 April 2010 07:10, MoreDakka <jhe...@3cis.biz> wrote:
>
> Hi all,
>
> So I've been able to get bacula working on CentOS5.4 quite easily and
> accessing the tapes..etc.. However I cannot, for the life of me, get BAT
> working at all. This is what i used for the ./configure:
>
> ./configure --enable-smartalloc --enable-bat --enable-bwx-console
> --enable-tray-monitor --with-mysql --enable-conio
> --with-qwt=/usr/include/qwt/
>
> Under /etc/bacula there is no bat script at all. Can someone please help
> me
> find out what I'm doing wrong here?
>
>
Hello,
i strongly suggest you use the bacula-bat src.rpm and build from it a new
RPM. I have it working nicely on 5.3 / 4 ,64bit.
I am not sure if the bundled .spec builds with the specific options you
need, but you can always add them to the config line inside the spec...
_________________________
{Beto|Norberto|Numard} Meijome
"With sufficient thrust, pigs fly just fine. However, this is
not necessarily a good idea. It is hard to be sure
where they are going to land, and it could be
dangerous sitting under them as they fly overhead."
[RFC1925 - section 2, subsection 3]
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
