openit admin wrote: > thanks for your help; ok I understand and I have changed the config. > When I run the job I get the following: > > Run Copy job > JobName: Full Backup Copy > Bootstrap: *None* > Client: kapital-backup-fd > FileSet: Full Linux Set > Pool: Full-Pool (From Job resource) > Read Storage: File (From Pool resource) > Write Storage: LTO2Drive (From Storage from Pool's NextPool resource) > JobId: *None* > When: 2010-04-20 09:30:38 > Catalog: MyCatalog > Priority: 10 > OK to run? (yes/mod/no): yes > Job queued. JobId=175 > > I thin this looks correct. But nothing happens; the job is in state > running. with "status storage=LTO2Ultrium" I get > > Device status: > Device "FileStorage" (/backup/bacula) is mounted with: > Volume: BackupFull-0001 > Pool: *unknown* > Media type: File > Total Bytes Read=0 Blocks Read=0 Bytes/block=0 > Positioned at File=0 Block=0 > Device "Ultrium-LTO2" (/dev/nst0) is not open. > Device is BLOCKED waiting to create a volume for: > Pool: Tape-Pool > Media type: LTO-2 > ==== > > Used Volume status: > BackupFull-0001 on device "FileStorage" (/backup/bacula) > Reader=1 writers=0 devres=0 volinuse=1 > BackupFull-0001 read volume JobId=163 > BackupFull-0001 read volume JobId=175 > > a tape is inserted; but nothing happens.
Hi, Do you have any tapes labeled in pool Tape-Pool or tapes in Tape-Pool with 'Append' status? If not, you should label it. Regards gani ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
