Hi, I have a new installation that I am tweeking the backups on. One of my backups goes through the firewall from an public ip address to where the backup server is on an private ip address. The backup works just fine for the first 2h 11m 15s and then it fails. After the first test failed I inserted the 'Heartbeat Interval' option and set it for 30 sec. This slowed down the backup but I wanted to make sure that it continued through the entire disk. The disk that I am backing up has closed to 250GB of data on it. I get approx. 50GB backed up before it fails. Is there any other setting that will help this finish. The logs are here:
First attempt: 15-Mar 10:26 distress-sd JobId 38: Labeled new Volume "hardware-0010" on device "FileStorage1" (/backup1). 15-Mar 10:26 distress-sd JobId 38: Wrote label to prelabeled Volume "hardware-0010" on device "FileStorage1" (/backup1) 15-Mar 12:37 distress-dir JobId 38: Fatal error: Network error with FD during Backup: ERR=Connection timed out 15-Mar 12:37 distress-sd JobId 38: JobId=38 Job="BackupHardware.2010-03-15_10.26.42_06" marked to be canceled. 15-Mar 12:37 distress-sd JobId 38: Job write elapsed time = 02:11:15, Transfer rate = 8.120 M Bytes/second 15-Mar 12:37 distress-sd JobId 38: Error: bsock.c:529 Read expected 65536 got 14596 from client:70.99.222.36:36643 15-Mar 12:37 distress-dir JobId 38: Fatal error: No Job status returned from FD. 15-Mar 12:37 distress-dir JobId 38: Error: Bacula distress-dir 5.0.1 (24Feb10): 15-Mar-2010 12:37:59 Build OS: x86_64-unknown-linux-gnu redhat JobId: 38 Job: BackupHardware.2010-03-15_10.26.42_06 Backup Level: Full (upgraded from Incremental) Client: "swift-fd" 5.0.1 (24Feb10) sparc-sun-solaris2.10,solaris,5.10 FileSet: "Swift Hardware Set" 2010-03-10 11:30:53 Pool: "Pool1" (From Job resource) Catalog: "MyCatalog" (From Client resource) Storage: "File1" (From command line) Scheduled time: 15-Mar-2010 10:26:34 Start time: 15-Mar-2010 10:26:44 End time: 15-Mar-2010 12:37:59 Elapsed time: 2 hours 11 mins 15 secs Priority: 10 FD Files Written: 0 SD Files Written: 707,122 FD Bytes Written: 0 (0 B) SD Bytes Written: 63,952,326,117 (63.95 GB) Rate: 0.0 KB/s Software Compression: None VSS: no Encryption: no Accurate: no Volume name(s): hardware-0010 Volume Session Id: 1 Volume Session Time: 1268673669 Last Volume Bytes: 64,023,383,638 (64.02 GB) Non-fatal FD errors: 0 SD Errors: 1 FD termination status: Error SD termination status: Canceled Termination: *** Backup Error *** Second attempt: 15-Mar 17:14 distress-dir JobId 40: Fatal error: Network error with FD during Backup: ERR=Connection timed out 15-Mar 17:14 distress-sd JobId 40: JobId=40 Job="BackupHardware.2010-03-15_15.02.58_10" marked to be canceled. 15-Mar 17:14 distress-sd JobId 40: Job write elapsed time = 01:57:35, Transfer rate = 7.432 M Bytes/second 15-Mar 17:14 distress-dir JobId 40: Fatal error: No Job 15-Mar 17:14 distress-dir JobId 40: Error: Bacula distress-dir 5.0.1 (24Feb10): 15-Mar-2010 17:14:15 Build OS: x86_64-unknown-linux-gnu redhat JobId: 40 Job: BackupHardware.2010-03-15_15.02.58_10 Backup Level: Full (upgraded from Incremental) Client: "swift-fd" 5.0.1 (24Feb10) sparc-sun-solaris2.10,solaris,5.10 FileSet: "Swift Hardware Set" 2010-03-10 11:30:53 Pool: "Pool1" (From Job resource) Catalog: "MyCatalog" (From Client resource) Storage: "File1" (From command line) Scheduled time: 15-Mar-2010 15:02:57 Start time: 15-Mar-2010 15:03:00 End time: 15-Mar-2010 17:14:15 Elapsed time: 2 hours 11 mins 15 secs Priority: 10 FD Files Written: 0 SD Files Written: 0 FD Bytes Written: 0 (0 B) SD Bytes Written: 0 (0 B) Rate: 0.0 KB/s Software Compression: None VSS: no Encryption: no Accurate: no Volume name(s): hardware-0012 Volume Session Id: 3 Volume Session Time: 1268673669 Last Volume Bytes: 51,996,669,624 (51.99 GB) Non-fatal FD errors: 0 SD Errors: 0 FD termination status: Error SD termination status: Running Termination: *** Backup Error *** status returned from FD. thanks, -- --------------------------------------------------------------------------- Jerold Lowry IT Manager / Software Engineer Engineering Design Team (EDT), Inc. a HEICO company 1400 NW Compton Drive, Suite 315 Beaverton, Oregon 97006 (U.S.A.) Phone: 503-690-1234 / 800-435-4320 Fax: 503-690-1243 Web: _www.edt.com <http://www.edt.com/>_ ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
