Hello,
04.03.2010 20:20, altgren...@exit0.us wrote:
> I'm running bacula 5.0.0-1 on an HP DL585-g2 that has Red Hat Linux 5.4 as
> the OS. I have a Quantum DXi3500 virtual tape unit fiber attached to the
> 585 as the backup library with autochanger. I created the RPMs myself with
> no problems. I tested the DXi with the mtx command and it changes tapes,
> reads, writes, and unloads all as expected.
I hope you also tested with tar or dd, and used the btape test...
> However, when I try to run a job from the console I get the following:
>
> 24-Feb 16:05 autolab-bg-b017d.ula.example. JobId 171: Fatal error:
> Storage daemon didn't accept Device "DXI3500" because:
> 3924 Device "DXI3500" not in SD Device resources.
> 24-Feb 16:05 autolab-bg-b017d.ula.example. JobId 171: Error:
What that message is missing is that a device with matching name and
media type could not be found. See below.
> Am I missing something in the config files?
Yes.
> Or will the Quantum DXI just
> not work with bacula?
I'm pretty sure it will work just fine.
> Constructive comments and help appreciated.
>
> Thanks
>
>
>
> == Bacula director config ==
...
> Storage {
> Name = DXI3500
> # Do not use "localhost" here
> Address = autolab-bg-b017d # N.B. Use a fully qualified
> name here
> SDPort = 9103
> Password = "<SD-PASSWORD>"
> # Device = FileStorage
> Device = DXI3500
> Media Type = Autochanger
^^^^^^^^^^^
> }
...
> == Bacula SD config ==
...
> AutoChanger {
> Name = "DXI3500"
> Changer Device = /dev/sg0
> Device = Drive-1, Drive-2, Drive-3, Drive-4
> Changer Command = "/usr/lib64/bacula/mtx-changer %c %o %S %a %d"
> }
>
> Device {
> Name = "Drive-1" #
> Drive Index = 0
> Device Type = Tape
> Media Type = LTO-3
^^^^^
> Archive Device = /dev/nst0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes
> Maximum File Size = 4GB
> }
...
I guess you see wher things fail - you need to set the same Media Type
names both in the DIR and the SD's device configuration.
Arno
--
Arno Lehmann
IT-Service Lehmann
Sandstr. 6, 49080 Osnabrück
www.its-lehmann.de
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
