On Mon, 22 Feb 2010 17:17:22 +0100 Tino Schwarze <bacula-us...@tisc.de> wrote:
> Hi there, > > I'm having trouble using bscan to recover the catalog data from a tape > which was purged by accident. > > I get the following output: > [snip] > "MJR263L3" on "Superloader-Drive" (/dev/nst0). Manual load my be > required. > 22-Feb 17:04 bscan JobId 0: 3301 Issuing autochanger "loaded? drive 0" > command. > 22-Feb 17:04 bscan JobId 0: 3302 Autochanger "loaded? drive 0", result: > nothing loaded. > Are you sure the tape was loaded as you expect? If you're worried about a lower-level problem, use 'mt -f /dev/nstX status' and 'tapeinfo -f /dev/sgX' to see the status of the drive. Then you can try something simple like 'dd if=/dev/st0 of=/dev/null' to see if that causes any error. Regards, -- Alex Chekholko ch...@pcbi.upenn.edu ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
