Dear all,
I need some hints, ideas whatever. I have a Quantum Scalar i40 with two
separate LTO-4 SAS drives. I've conneced the drives with two SAS cables
to two separate SAS controller within the backup server.
# cat /proc/scsi/scsi
Attached devices:
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: Ultrium 4-SCSI Rev: U51Z
Type: Sequential-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 01
Vendor: QUANTUM Model: Scalar i40-i80 Rev: 100G
Type: Medium Changer ANSI SCSI revision: 03
Host: scsi5 Channel: 00 Id: 00 Lun: 00
Vendor: HP Model: Ultrium 4-SCSI Rev: U51Z
Type: Sequential-Access ANSI SCSI revision: 05
So far, so good, but mtx is not willing to see the second drive:
# mtx -f /dev/sg1 status
Storage Changer /dev/sg1:1 Drives, 29 Slots ( 5 Import/Export )
Data Transfer Element 0:Full (Storage Element 20 Loaded):VolumeTag =
MZ2019
Storage Element 1:Empty:VolumeTag=
Storage Element 2:Empty:VolumeTag=
[..]
And mtx is not willing to load a tape into the second drive:
# mtx -f /dev/sg1 load 22 1
illegal <drive-number> argument '1' to 'load' command
Any ideas what I did wrong? Any hints where I can start debugging?
Because since Baculas mtx-changer is using mtx, I think I am not able to
use the second drive.
Thanks for your help and have a nice weekend,
- Dan
------------------------------------------------------------------------------
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW
http://p.sf.net/sfu/solaris-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
