Hi John,
I have changed my bacula-sd.conf file like this ;
Device {
Name = Drive-1
Drive Index = 0
Media Type = LTO4
Archive Device = /dev/nst0
Changer Device = /dev/sg5
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes;
LabelMedia = yes;
Maximum Changer Wait = 300 seconds
Maximum Rewind Wait = 300 seconds
Maximum Open Wait = 300 seconds
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
Alert Command = "sh -c 'smartctl -H -l error %c'"
}
But still does not load the cartridge and get the same error ;
23-Dec 17:02 backup-sd JobId 20: Invalid slot=0 defined in catalog for
Volume "Full-0001" on "Drive-1" (/dev/nst0). Manual load may be
required.
23-Dec 17:02 backup-sd JobId 20: 3301 Issuing autochanger "loaded?
drive 0" command.
23-Dec 17:02 backup-sd JobId 20: 3302 Autochanger "loaded? drive 0",
result: nothing loaded.
23-Dec 17:02 backup-sd JobId 20: 3301 Issuing autochanger "loaded?
drive 0" command.
23-Dec 17:02 backup-sd JobId 20: 3302 Autochanger "loaded? drive 0",
result: nothing loaded.
23-Dec 17:02 backup-sd JobId 20: Please mount Volume "Full-0001" or
label a new one for:
Job: BackupCatalog.2009-12-23_16.17.53_03
Storage: "Drive-1" (/dev/nst0)
Pool: SenelikPool
Media type: LTO4
What do you think about it ?
Regards,
ismail
On Tue, Dec 22, 2009 at 9:46 AM, Ismail OZATAY <ism...@ismailozatay.net> wrote:
Hello ,
I bought a dell tl4000 tape libray with 2 drives. I am trying to use it
and search and applied some example configs but i get some errors. I
have put "AutomaticMount=yes" option but it wants me to mount it
manually.Here is my configs ;
Pool {
Name = SenelikPool
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 365d
Label Format = Full-
}
bacula-sd.conf
Autochanger {
Name = delltl4000
Device = Drive-1, Drive-2
Changer Command = "/usr/lib64/bacula/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg5
}
Device {
Name = Drive-1
Drive Index = 0
Media Type = LTO4
Archive Device = /dev/st0
Changer Device = /dev/sg5
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes;
LabelMedia = yes;
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
Alert Command = "sh -c 'smartctl -H -l error %c'"
}
Device {
Name = Drive-2
Drive Index = 1
Media Type = LTO4
Archive Device = /dev/st1
Changer Device = /dev/sg5
AutomaticMount = yes;
Autochanger = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
LabelMedia = yes;
# Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
Alert Command = "sh -c 'smartctl -H -l error %c'"
}
When i run a job i get this error ;
22-Dec 15:22 backup-dir JobId 15: shell command: run BeforeJob "/usr/lib64/bacula/make_catalog_backup bacula bacula xxx"
22-Dec 15:22 backup-dir JobId 15: Start Backup JobId 15, Job=BackupCatalog.2009-12-22_15.22.16_42
22-Dec 15:22 backup-dir JobId 15: Using Device "Drive-1"
22-Dec 15:22 backup-sd JobId 15: Invalid slot=0 defined in catalog for Volume "Full-0001" on "Drive-1" (/dev/st0). Manual load may be required.
22-Dec 15:22 backup-sd JobId 15: Invalid slot=0 defined in catalog for Volume "Full-0001" on "Drive-1" (/dev/st0). Manual load may be required.
22-Dec 15:22 backup-sd JobId 15: 3301 Issuing autochanger "loaded? drive 0" command.
22-Dec 15:22 backup-sd JobId 15: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
22-Dec 15:22 backup-sd JobId 15: 3301 Issuing autochanger "loaded? drive 0" command.
22-Dec 15:22 backup-sd JobId 15: 3302 Autochanger "loaded? drive 0", result: nothing loaded.
22-Dec 15:22 backup-sd JobId 15: Invalid slot=0 defined in catalog for Volume "Full-0001" on "Drive-1" (/dev/st0). Manual load may be required.
Here is my device status ;
[r...@backup bacula]# mtx -f /dev/sg5 status
Storage Changer /dev/sg5:2 Drives, 47 Slots ( 3 Import/Export )
Data Transfer Element 0:Empty
Data Transfer Element 1:Empty
Storage Element 1:Full :VolumeTag=000049L4
Storage Element 2:Full :VolumeTag=000046L4
Storage Element 3:Full :VolumeTag=000042L4
Storage Element 4:Full :VolumeTag=000047L4
Storage Element 5:Full :VolumeTag=000048L4
Storage Element 6:Full :VolumeTag=000041L4
Storage Element 7:Full :VolumeTag=000045L4
Storage Element 8:Full :VolumeTag=000050L4
Storage Element 9:Full :VolumeTag=000029L4
Storage Element 10:Full :VolumeTag=000038L4
Storage Element 11:Full :VolumeTag=000035L4
Storage Element 12:Full :VolumeTag=000032L4
Storage Element 13:Full :VolumeTag=000030L4
Storage Element 14:Full :VolumeTag=000039L4
Storage Element 15:Full :VolumeTag=000036L4
Storage Element 16:Full :VolumeTag=000033L4
Storage Element 17:Full :VolumeTag=000028L4
Storage Element 18:Full :VolumeTag=000040L4
Storage Element 19:Full :VolumeTag=000037L4
Storage Element 20:Full :VolumeTag=000034L4
Storage Element 21:Full :VolumeTag=000005L4
Storage Element 22:Full :VolumeTag=000002L4
Storage Element 23:Full :VolumeTag=000018L4
Storage Element 24:Full :VolumeTag=000015L4
Storage Element 25:Full :VolumeTag=000004L4
Storage Element 26:Full :VolumeTag=000020L4
Storage Element 27:Full :VolumeTag=000017L4
Storage Element 28:Full :VolumeTag=000014L4
Storage Element 29:Full :VolumeTag=000003L4
Storage Element 30:Full :VolumeTag=000019L4
Storage Element 31:Full :VolumeTag=000016L4
Storage Element 32:Full :VolumeTag=000001L4
Storage Element 33:Full :VolumeTag=000027L4
Storage Element 34:Full :VolumeTag=000025L4
Storage Element 35:Full :VolumeTag=000021L4
Storage Element 36:Full :VolumeTag=000008L4
Storage Element 37:Full :VolumeTag=000026L4
Storage Element 38:Full :VolumeTag=000024L4
Storage Element 39:Full :VolumeTag=000010L4
Storage Element 40:Full :VolumeTag=000007L4
Storage Element 41:Full :VolumeTag=000022L4
Storage Element 42:Full :VolumeTag=000023L4
Storage Element 43:Full :VolumeTag=000009L4
Storage Element 44:Full :VolumeTag=000006L4
Storage Element 45 IMPORT/EXPORT:Full :VolumeTag=000013L4
Storage Element 46 IMPORT/EXPORT:Full :VolumeTag=000012L4
Storage Element 47 IMPORT/EXPORT:Full :VolumeTag=000011L4
Any idea ?
First off do not use st0 if you can use nst0.
Also you probably will need to modify your mtx-changer.sh script. The
reason is your OS is not waiting for your changer to actually load the
tape. I can see that from the log. The time between start of load and
failure was 0 minutes...
Look at the comments on this script and consult the list archives for
this problem. I know this problem comes up many times a year for
different changers.
John
|
------------------------------------------------------------------------------
This SF.Net email is sponsored by the Verizon Developer Community
Take advantage of Verizon's best-in-class app development support
A streamlined, 14 day to market process makes app distribution fast and easy
Join now and get one step closer to millions of Verizon customers
http://p.sf.net/sfu/verizon-dev2dev
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
