Hi all, I am a new bacula user running 3.02 on Ubuntu 8.04 LTS. I am backing up about 7 clients(mix of windows and linux) to a DDS3 tape autochanger. After testing and configuring for a few days I went live with this on Sunday with a full backup of all clients and doing incrementals Mon-Fri. So the problem... Yesterday I had a power outage. Bacula was idle, but there was a volume mounted in the drive. Today when the incrementals fired, I got an error: 05-Aug 10:25 pendual-dir JobId 39: Start Backup JobId 39, Job=mrc-vm1-backup.2009-08-05_10.25.39_04 05-Aug 10:25 pendual-dir JobId 39: Using Device "Drive-1" 05-Aug 10:25 mrc-vm1-fd JobId 39: DIR and FD clocks differ by 12 seconds, FD automatically compensating. 05-Aug 10:25 pendual-sd JobId 39: Volume "90m_1_1" previously written, moving to end of data. 05-Aug 10:26 pendual-sd JobId 39: Error: Bacula cannot write on tape Volume "90m_1_1" because: The number of files mismatch! Volume=1 Catalog=14 05-Aug 10:26 pendual-sd JobId 39: Marking Volume "90m_1_1" in Error in Catalog.
It correctly loaded the next volume in the autochanger and did the backups but I'm not sure why I am getting this error? A bls on the volume shows 14 files, but does have an interesting entry at the end. # bls -j -V 90m_1_1 -c /etc/opt/bacula/conf/bacula-sd.conf Drive-1|tee 90m_1_1.out # grep JobId= 90m_1_1.out |grep -v "Volume Record"|wc -l 28 90m_1_1.out <excerpt> ... Begin Job Session Record: File:blk=13:1 SessId=3 SessTime=1249401525 JobId=31 Job=mrc6320-backup.2009-08-04_17.00.00_06 Date=04-Aug-2009 17:19:06 Level=I Type=B End Job Session Record: File:blk=13:579 SessId=3 SessTime=1249401525 JobId=31 Date=04-Aug-2009 17:24:18 Level=I Type=B Files=417 Bytes=37,303,402 Errors=0 Status=T 05-Aug 10:16 bls JobId 0: Error: block.c:1010 Read error on fd=3 at file:blk 14:0 on device "Drive-1" (/dev/nst0). ERR=Input/output error. 05-Aug 10:16 bls JobId 0: End of Volume at file 14 on device "Drive-1" (/dev/nst0), Volume "90m_1_1" 05-Aug 10:16 bls JobId 0: End of all volumes. 05-Aug 10:16 bls JobId 0: Alert: smartctl version 5.37 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen 05-Aug 10:16 bls JobId 0: Alert: Home page is http://smartmontools.sourceforge.net/ 05-Aug 10:16 bls JobId 0: Alert: 05-Aug 10:16 bls JobId 0: Alert: TapeAlert Errors (C=Critical, W=Warning, I=Informational): 05-Aug 10:16 bls JobId 0: Alert: [0x14] C: The tape drive needs cleaning: 05-Aug 10:16 bls JobId 0: Alert: 1. If the operation has stopped, eject the tape and clean the drive. 05-Aug 10:16 bls JobId 0: Alert: 2. If the operation has not stopped, wait for it to finish and then 05-Aug 10:16 bls JobId 0: Alert: clean the drive. 05-Aug 10:16 bls JobId 0: Alert: Check the tape drive users manual for device specific cleaning instructions. 05-Aug 10:16 bls JobId 0: Alert: [0x03] W: The operation has stopped because an error has occurred while reading 05-Aug 10:16 bls JobId 0: Alert: or writing data that the drive cannot correct. 05-Aug 10:16 bls JobId 0: Alert: 05-Aug 10:16 bls JobId 0: Alert: Error counter log: 05-Aug 10:16 bls JobId 0: Alert: Errors Corrected by Total Correction Gigabytes Total 05-Aug 10:16 bls JobId 0: Alert: ECC rereads/ errors algorithm processed uncorrected 05-Aug 10:16 bls JobId 0: Alert: fast | delayed rewrites corrected invocations [10^9 bytes] errors 05-Aug 10:16 bls JobId 0: Alert: read: 0 0 0 1 0 0.000 0 05-Aug 10:16 bls JobId 0: Alert: write: 0 0 0 0 0 0.000 0 I did clean the drive and try this again, but I think that is a bogus alert based purely on the read error and is more a symptom than a cause. I think I could pretty easily fix this by simply purging the jobs and setting the volume status to recycle, but I am trying to understand why this is happening, since everything was idle when the powerfail happened. I'm assuming maybe it has something to do with EOF handling, but nothing was writing so I am a bit confused? This is a great backup utility so far, I am enjoying working with it. Thanks for any ideas/opinions. Mike ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
