On Fri, Jul 24, 2009 at 11:40 AM, Kris Monstad<kris.mons...@absolutestudios.com> wrote: > Hi, > > We're using Bacual v2.2.5 on Centos 4.7. > > After a power cut which affected only our LTO4 drive (server on UPS) > none of our tapes are mounting properly. The output is as follows: > > > *mount LTO4 > block.c:995 Read error on fd=5 at file:blk 0:0 on device "LTO4" > (/dev/st0). ERR=Input/output error. > block.c:995 Read error on fd=5 at file:blk 0:0 on device "LTO4" > (/dev/st0). ERR=Input/output error. > 3902 Cannot mount Volume on Storage Device "LTO4" (/dev/st0) because: > Requested Volume "" on "LTO4" (/dev/st0) is not a Bacula labeled Volume, > because: ERR=block.c:995 Read error on fd=5 at file:blk 0:0 on device > "LTO4" (/dev/st0). ERR=Input/output error. > 3905 Device "LTO4" (/dev/st0) open but no Bacula volume is mounted. > If this is not a blank tape, try unmounting and remounting the Volume. > > > Unmounting and re-mounting gives the same message. > > Any advice or thoughts on what is happening here are appreciated! >
Were these volumes labeled? The errors appear that the volumes were never written to. John ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
