On Mon, Jul 13, 2009 at 10:22 AM, sieber<bacula-fo...@backupcentral.com> wrote: > > Hello people > I Have a Bacula installed on Debian Lenny with a sony ait (40/104 GB) Tape > Drive. > Bacula is working fine with backups smaller than 40gb. > But when a try to runa job with 102 GB, bacula writes only something about > 40/42 GB (the size of tape without compression). > > This way I think: The Hardware Compression could be not active... > Could this make sense? > > some information about tape/drive: > bkp:/etc/bacula# cat /proc/scsi/scsi > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: VMware Model: Virtual disk Rev: 1.0 > Type: Direct-Access ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 01 Lun: 00 > Vendor: SONY Model: SDX-470V Rev: 0100 > Type: Sequential-Access ANSI SCSI revision: 02 > > > bkp:/etc/bacula# mt -f /dev/nst0 status > drive type = 114 > drive status = 956301312 > sense key error = 0 > residue count = 0 > file number = 1 > block number = 0 > bkp:/etc/bacula# > > Could someone help me? >
Are you writing only compressed files (.mpg, .jpg, .zip, .bz2 ...) to your backup or is software compression on? John ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
