Den Fri, 15 May 2009 17:15:14 -0400
skrev Daniel Hertanu <d...@unixmob.com>:
> Hi
> I was wondering if someone using a Dell PV-124T tape library can
> paste the Autochanger and Device resources from bacula-sd.conf file
> here.
>
> Btape tests run fine, including the autochanger, but in Bacula I'm
> not able to make the autochanger work. The tape will refuse to be
> loaded and message returned is that /dev/nst0 is not an autochanger.
> I used the same configuration I used once for an Overland and an
> HP_something tape libraries, but the PV-124T doesn't work. Thank you.
>
> Daniel
>
This is for a PV-122T but I think it is very similar:
Autochanger {
Name = PV-122T
Device = PV-122T-1, PV-122T-2
Changer Command = "/usr/local/bacula/etc/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg4
}
Device {
Name = PV-122T-1
Drive Index = 0
Media Type = LTO-2
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
}
Device {
Name = PV-122T-2
Drive Index = 1
Media Type = LTO-2
Archive Device = /dev/nst0
AutomaticMount = yes; # when device opened, read it
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
}
Note that the changer are on /dev/sgX and not on /dev/nstX!
Hope that helps!
\\anders
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
------------------------------------------------------------------------------
Crystal Reports - New Free Runtime and 30 Day Trial
Check out the new simplified licensing option that enables
unlimited royalty-free distribution of the report engine
for externally facing server and web deployment.
http://p.sf.net/sfu/businessobjects
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
