Hi List, i have started a restore job but at start time the needed tape was not in the autochanger
> The job will require the following > Volume(s) Storage(s) SD Device(s) > ========================================== > > FUL112 JBBB JBBB i got this message > 15-May 14:21 backup-dir JobId 72185: Start Restore Job > RestoreFiles.2009-05-15_14.21.01_38 > 15-May 14:21 backup-dir JobId 72185: Using Device "JBBB-1" > > 15-May 14:21 backup-sd-bb JobId 72185: Invalid slot=0 defined in catalog for > Volume "FUL112" on "JBBB-1" (/dev/nst0). Manual load may be required. > > i put the tape into the changer and run > *update slots > .... > Connecting to Storage daemon JBBB at backup-sd-bb.ic3s.de:9103 ... > > 3306 Issuing autochanger "list" command. > .... > Catalog record for Volume "FUL112" updated to reference slot 15. > after that i tried to mount the volume > *mount > The defined Storage resources are: > 1: JBGS > 2: JBBB > 3: FileStorageBB > 4: USBStorageBB1 > Select Storage resource (1-4): 2 > Enter autochanger drive[0]: > Enter autochanger slot: 15 > 3001 OK mount. Device="JBBB-1" (/dev/nst0) > You have messages. > *m > 15-May 14:25 backup-sd-bb JobId 72185: Invalid slot=0 defined in catalog for > Volume "FUL112" on "JBBB-1" (/dev/nst0). Manual load may be required. > > > 15-May 14:25 backup-sd-bb JobId 72185: 3301 Issuing autochanger "loaded? > drive 0" command. > 15-May 14:25 backup-sd-bb JobId 72185: 3302 Autochanger "loaded? drive 0", > result: nothing loaded. > 15-May 14:25 backup-sd-bb JobId 72185: Warning: acquire.c:221 Read open > device "JBBB-1" (/dev/nst0) Volume "FUL112" failed: ERR=dev.c:474 Unable to > open device "JBBB-1" (/dev/nst0): ERR=No medium found > result: nothing loaded => ERR=No medium found ui, big surprise :) it looks like bacula simply forgot to move the tape from the slot 15 into drive 0 before opening the device. with 2.4.4 this problem does not appear, so i think it is not a problem of my configuration. and i wonder what this means: backup-sd-bb JobId 72185: Invalid slot=0 defined in catalog for Volume "FUL112" does the sd really look into the catalog (query the database) to determine the slot of the volume? Best Regards Thomas p.s.: after using mtx on the commandline to load the tape into the drive i can mount the volume and the job runs > *mount > > The defined Storage resources are: > > 1: JBGS > > 2: JBBB > > 3: FileStorageBB > > 4: USBStorageBB1 > > Select Storage resource (1-4): 2 > > Enter autochanger drive[0]: > > Enter autochanger slot: 15 > > 3001 OK mount. Device="JBBB-1" (/dev/nst0) > > You have messages. > > *m > > 15-May 14:49 backup-sd-bb JobId 72185: Invalid slot=0 defined in catalog for > Volume "FUL112" on "JBBB-1" (/dev/nst0). Manual load may be required. > > > 15-May 14:49 backup-sd-bb JobId 72185: 3301 Issuing autochanger "loaded? > drive 0" command. > 15-May 14:49 backup-sd-bb JobId 72185: 3302 Autochanger "loaded? drive 0", > result is Slot 15. > 15-May 14:49 backup-sd-bb JobId 72185: Ready to read from volume "FUL112" on > device "JBBB-1" (/dev/nst0). > 15-May 14:49 backup-sd-bb JobId 72185: Forward spacing Volume "FUL112" to > file:block 119:0. -- [:O]###[O:] ------------------------------------------------------------------------------ Crystal Reports - New Free Runtime and 30 Day Trial Check out the new simplified licensing option that enables unlimited royalty-free distribution of the report engine for externally facing server and web deployment. http://p.sf.net/sfu/businessobjects _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
