Hi James, Thanks for your suggestions, you were right (scroll down).
On Wednesday 13 May 2009 02:35:17 am James Harper wrote: > > I have a recently installed v2.4.5 client on a fresh WinXP SP3 system > > and > > > getting these errors in the director's log: > > failed. VSS support is disabled on this drive. > > 11-May 19:56 kiff-fd JobId 24679: Warning: Generate VSS snapshot of > drive "d:\" failed. VSS support is disabled on this drive. > > Is the Volume Shadow Copy service enabled (set to manual)? This was it, VSS service was set to Manual and not running. I've set it to Auto, is it right thing to do? > Run vssadmin at a command prompt - what does it say? > > Are you definitely using NTFS and not FAT or anything? It's NTFS. I do not understand why I've never encountered this problem before. The user told me he did not change any defaults while installing WinXP. Perhaps, SP3 had the defaults changed for VSS service. I am not an expert in Windows administration I should admit... --Ivan The information in this e-mail is intended only for the person to whom it is addressed. If you believe this e-mail was sent to you in error and the e-mail contains patient information, please contact the Partners Compliance HelpLine at http://www.partners.org/complianceline . If the e-mail was sent to you in error but does not contain patient information, please contact the sender and properly dispose of the e-mail. ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
