Hello,
I've configured bacula without block size settings,
so the default of 63k (126 * 512) are used.
Now i like to change the default block size to 128k.
Hardware is 2 drive LTO-4 auto changer.
Device {
Name = Drive-1
Drive Index = 0
Media Type = LTO-4
Archive Device = /dev/nst0
AutomaticMount = yes
AlwaysOpen = yes
RemovableMedia = yes
RandomAccess = no
Autochanger = yes
...
Minimum block size = 63K
Maximum block size = 128K
}
Anyone tried this?
I am concerned about old tapes having 63K block size,
are they still readable/usable by bacula?
Thanks
Ulrich
--
Ulrich Leodolter <ulrich.leodol...@obvsg.at>
OBVSG
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
