Is there a size limit to a vtape device? I've tries specifying tape sizes of 25G but the tapes end up only being about 20G in size. I'm also getting error trying to write to the end of the vtape device beyond this ~20G size. This is what the error looks like:
09-May 00:59 server.lordsfam.net JobId 48: Wrote label to prelabeled Volume "Monthly-0006" on device "Drive-1" (/var/spool/bacula/drive1) 09-May 00:59 server.lordsfam.net JobId 48: New volume "Monthly-0006" mounted on device "Drive-1" (/var/spool/bacula/drive1) at 09-May-2009 00:59. 09-May 01:43 server.lordsfam.net JobId 48: End of Volume "Monthly-0006" at 19:16300 on device "Drive-1" (/var/spool/bacula/drive1). Write of 64512 bytes got -1. 09-May 01:43 server.lordsfam.net JobId 48: Error: Error writing final EOF to tape. This Volume may not be readable. dev.c:1723 ioctl MTWEOF error on "Drive-1" (/var/spool/bacula/drive1). ERR=No space left on device. 09-May 01:43 server.lordsfam.net JobId 48: End of medium on Volume "Monthly-0006" Bytes=21,452,562,432 Blocks=332,535 at 09-May-2009 01:43. On a different system, configured almost the same, I get the same error with the exact same Bytes written out. If the limit of the vtape device is 21,452,562,432 then I feel this should be documented. This number is just less then 20G (21,474,836,480) by just less then 20M. So I believe even if you specify a Max Volume Bytes of 20G you will still get the above error. Thanks, -Shad ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
