On Mon, Mar 30, 2009 at 11:30 AM, Sergio Belkin <seb...@gmail.com> wrote: > 2009/3/30 John Drescher <dresche...@gmail.com>: >>> When I try to mount a tape, it outputs (it doesn't happen with others tapes) >>> >>> block.c:275 Volume data error at 0:0! Wanted ID: "BB02", got "". >>> Buffer discarded. >>> 3902 Cannot mount Volume on Storage Device "LTO3" (/dev/nst0) because: >>> Requested Volume "" on "LTO3" (/dev/nst0) is not a Bacula labeled >>> Volume, because: ERR=block.c:275 Volume data error at 0:0! Wanted ID: >>> "BB02", got "". Buffer discarded. >>> 3905 Device "LTO3" (/dev/nst0) open but no Bacula volume is mounted. >>> If this is not a blank tape, try unmounting and remounting the Volume. >>> >>> end of output >>> >>> What can i do? >>> >> Is this on an autochanger? > > No it's not > > Did you try unmounting and remounting the Volume? > > Yes I did, but problems persits. >
Was this tape new or have you used it for some time? Any chance it was in the drive and accidentally rewound outside of bacula and then bacula ran a job on the volume? John ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
