I am using Ubuntu 8.10 Desktop (tried both 32-bit and 64-bit versions)
and liferay 2.4.4. I used the following procedure to create the bat module:
*
*remove qt3* (if installed)
o
sudo apt-get --purge remove qt3-dev-tools qt3-designer libqwt-dev
*
*install qt4*
o
sudo apt-get install qt4-dev-tools qt4-qtconfig libqt4-core
libqt4-dev
*
*install qwt*
o
apt-get install libqwt5-qt4 libqwt5-qt4-dev
o
make sure, that under /usr/lib the libqwt.so links to
libqwt-qt4.so.5, if not create a symlink.
o
cd /usr/lib
sudo ln -s libqwt-qt4.so.5 libqwt.so
*
configure
o
./configure --enable-bat --enable-client-only --with-qwt=/usr/lib/
o
The result of the succesfull configure should show these lines:
+
bat support: yes -L/usr/lib64
client-only: yes
*
proceed to make
o
make
*
install bat
o
sudo cp src/qt-console/bat /usr/sbin/
o
sudo cp src/qt-console/bat.conf /etc/bacula/
*
start it
o
bat -d99 -c /etc/bacula/bat.conf
When I run it I get a
*** buffer overflow detected ***: bat terminated
====== Backtrace: ======
/lib/tls/i686/cmov/libc.so.6(__fortify_fail+0x48)[oxb727d6d8]
/lib/tls/i686/cmov/libc.so.6[0xb727b800]
bat[0x8116d8c]
bat[ox8055c7d]
/lib/tls/i686/cmov/libc.so.6(__livc_start_main+0xe5)[0xb7199685]
bat[0x80555b1]
--
*Mark Wright*
Chief Technology Officer
Web: redesetgrow.com <http://www.redesetgrow.com/>
Email: mwri...@redesetgrow.com <mailto:mwri...@redesetgrow.com>
Phone: (888) 386-3822
------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
