> Thanks for the responses. The trouble listed in my other thread is > mostly due to OpenBSD's chio utility not keeping track of the slot > from which the currently loaded tape was pulled. > > I'm unclear on your response, though. Are you saying that btape gives > you problems if you don't have a tape loaded? If it's working, would > you mind including your storage configs? >
Btape bombs out if there is not a tape loaded. I have to manually load a tape, also if bacula-sd is running, I have to first release the drive, then manually load the tape and then run btape. I thought bacula kept track of where the tapes were loaded from. The reason I suspect this is that before I had udev map the drives based on WWID, tapes would get swapped when the drives did not come up in the same order. The mtx command showed the correct slot loaded in the drive, but Bacula would switch them. Robert LeBlanc Life Sciences Computer Support Brigham Young University lebl...@byu.edu (801)422-1882 ------------------------------------------------------------------------------ Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users