> In bconsole, I type run, select job "client1". > > That's it, I have LTO tape's defined in the LTO pool. The job is set to use > the LTO-Pool. > > In fact, currently I have commented out the Quantum-DLT device and am > running backups on the Quantum-LTO drive with no problems, but would like to > use the Quantum-DLT device for special backups. > > BTW, we only back up the file server to tape so 127.0.0.1 works for us. >
In my bacula I have DLT, LTO, DVD and disk storages all defined and on the same sd . I have more than 1 sd machine. The machine with the director has DVD + DISK + DLT. The SD I use most (different machine) has DLT + 2 x LTO + DISK + DVD. Have you restarted the server after changing this configuration. If you do a list media pool="LTO-Pool" does it show any DLT volumes? John Didn't restart server, can try that tonight after hours. Yes, list media pool="LTO-Pool" shows the full list (10 tapes) thee first of which was used last night, the rest are ready to go. As far as you can see my configs are OK? ********************** Think I misunderstood, Yes I restarted Bacula (Bacula stop/Bacula start) No I did not restart the PC. ------------------------------------------------------------------------------ Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
