Hi Blake, This looks like a Linux box?
Which kernel? 'uname -a' Which card? 'lspci -v' Check all the cables, make sure they're seated correctly? Try a different cable? Try powering everything off and then powering everything back on, starting with the outermost SCSI devices? Regards, Alex On Thu, 19 Feb 2009 11:03:29 -0600 Blake Dunlap <bl...@nxs.net> wrote: > I realize this is not directly Bacula, but does anyone know what might be my > problem (settings / hardware issues) from the below SCSI errors? > > scsi1:0:0:0: Attempting to abort cmd f4003500: 0x34 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 0x0 > scsi1: At time of recovery, card was not paused > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< > scsi1: Dumping Card State at program address 0x198 Mode 0x11 > Card was paused > HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] > DFFSTAT[0x19] SCSISIGI[0x84] SCSIPHASE[0x0] SCSIBUS[0x0] > LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] > SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] > SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] > SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] > LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] > > SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0 > qinstart = 27348 qinfifonext = 27348 > QINFIFO: > WAITING_TID_QUEUES: > Pending list: > 3 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x7] > Total 1 > Kernel Free SCB list: 2 1 0 > Sequencer Complete DMA-inprog list: > Sequencer Complete list: > Sequencer DMA-Up and Complete list: > > scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 > scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 > scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 > SIMODE0[0xc] > CCSCBCTL[0x4] > scsi1: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x102 > scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff2e > CDB 3 0 0 0 20 0 > STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> > DevQ(0:0:0): 0 waiting > DevQ(0:1:0): 0 waiting > DevQ(0:2:0): 0 waiting > DevQ(0:3:0): 0 waiting > scsi1:0:0:0: Device is active, asserting ATN > Recovery code sleeping > (scsi1:A:0:0): Recovery SCB completes > Unexpected busfree in Command phase, 1 SCBs aborted, PRGMCNT == 0x198 > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< > scsi1: Dumping Card State at program address 0x196 Mode 0x11 > Card was paused > HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] > DFFSTAT[0x13] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] > LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] > SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] > SSTAT1[0x8] SSTAT2[0xc0] SSTAT3[0x0] PERRDIAG[0xc0] > SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] > LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] > > SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0 > qinstart = 27348 qinfifonext = 27348 > QINFIFO: > WAITING_TID_QUEUES: > Pending list: > Total 0 > Kernel Free SCB list: 3 2 1 0 > Sequencer Complete DMA-inprog list: > Sequencer Complete list: > Sequencer DMA-Up and Complete list: > > scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 > scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 > scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 > SIMODE0[0xc] > CCSCBCTL[0x4] > scsi1: REG0 == 0x3, SINDEX = 0x180, DINDEX = 0x102 > scsi1: SCBPTR == 0x3, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff2e > CDB 3 0 0 0 20 0 > STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> > DevQ(0:0:0): 0 waiting > DevQ(0:1:0): 0 waiting > DevQ(0:2:0): 0 waiting > DevQ(0:3:0): 0 waiting > Recovery code awake > (scsi1:A:0:0): Unexpected busfree in Command phase, 1 SCBs aborted, PRGMCNT > == 0x19a > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< > scsi1: Dumping Card State at program address 0x198 Mode 0x11 > Card was paused > HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] > DFFSTAT[0x13] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] > LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] > SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] > SSTAT1[0x8] SSTAT2[0xc0] SSTAT3[0x0] PERRDIAG[0xc0] > SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] > LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] > > SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0x0 > qinstart = 27349 qinfifonext = 27349 > QINFIFO: > WAITING_TID_QUEUES: > Pending list: > Total 0 > Kernel Free SCB list: 3 2 1 0 > Sequencer Complete DMA-inprog list: > Sequencer Complete list: > Sequencer DMA-Up and Complete list: > > scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x3 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 > scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 > scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 > SIMODE0[0xc] > CCSCBCTL[0x4] > scsi1: REG0 == 0x3, SINDEX = 0x1c0, DINDEX = 0x102 > scsi1: SCBPTR == 0x3, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff2e > CDB 0 0 0 0 0 0 > STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> > DevQ(0:0:0): 0 waiting > DevQ(0:1:0): 0 waiting > DevQ(0:2:0): 0 waiting > DevQ(0:3:0): 0 waiting > Recovery code sleeping > (scsi1:A:0:0): Bus Device Reset Message Sent > Recovery SCB completes > scsi1: Bus Device Reset on A:0. 1 SCBs aborted > Recovery code awake > scsi1: Device reset returning 0x2002 > st1: Block limits 1 - 16777215 bytes. > init_special_inode: bogus i_mode (0) > smb_retry: no connection process > smb_add_request: request [cae1ae80, mid=0] timed out! > smb_delete_inode: could not close inode 2 > scsi1:0:0:0: Attempting to abort cmd e200c380: 0x5 0x0 0x0 0x0 0x0 0x0 > scsi1: At time of recovery, card was not paused > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< > scsi1: Dumping Card State at program address 0x197 Mode 0x11 > Card was paused > HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] > DFFSTAT[0x19] SCSISIGI[0x84] SCSIPHASE[0x0] SCSIBUS[0x0] > LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] > SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] > SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] > SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] > LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] > > SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 > qinstart = 43726 qinfifonext = 43726 > QINFIFO: > WAITING_TID_QUEUES: > Pending list: > 2 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x7] > Total 1 > Kernel Free SCB list: 3 1 0 > Sequencer Complete DMA-inprog list: > Sequencer Complete list: > Sequencer DMA-Up and Complete list: > > scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 > scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 > scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 > SIMODE0[0xc] > CCSCBCTL[0x4] > scsi1: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x102 > scsi1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff2e > CDB 3 0 0 0 20 0 > STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> > DevQ(0:0:0): 0 waiting > DevQ(0:1:0): 0 waiting > DevQ(0:2:0): 0 waiting > DevQ(0:3:0): 0 waiting > scsi1:0:0:0: Device is active, asserting ATN > Recovery code sleeping > (scsi1:A:0:0): Recovery SCB completes > Unexpected busfree in Command phase, 1 SCBs aborted, PRGMCNT == 0x19a > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< > scsi1: Dumping Card State at program address 0x198 Mode 0x11 > Card was paused > HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] > DFFSTAT[0x13] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] > LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] > SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] > SSTAT1[0x8] SSTAT2[0xc0] SSTAT3[0x0] PERRDIAG[0xc0] > SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] > LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] > > SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 > qinstart = 43726 qinfifonext = 43726 > QINFIFO: > WAITING_TID_QUEUES: > Pending list: > Total 0 > Kernel Free SCB list: 2 3 1 0 > Sequencer Complete DMA-inprog list: > Sequencer Complete list: > Sequencer DMA-Up and Complete list: > > scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 > scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 > scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 > SIMODE0[0xc] > CCSCBCTL[0x4] > scsi1: REG0 == 0x2, SINDEX = 0x180, DINDEX = 0x102 > scsi1: SCBPTR == 0x2, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff2e > CDB 3 0 0 0 20 0 > STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> > DevQ(0:0:0): 0 waiting > DevQ(0:1:0): 0 waiting > DevQ(0:2:0): 0 waiting > DevQ(0:3:0): 0 waiting > Recovery code awake > (scsi1:A:0:0): Unexpected busfree in Command phase, 1 SCBs aborted, PRGMCNT > == 0x19a > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< > scsi1: Dumping Card State at program address 0x198 Mode 0x11 > Card was paused > HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] > DFFSTAT[0x13] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] > LASTPHASE[0x80] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] > SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] > SSTAT1[0x8] SSTAT2[0xc0] SSTAT3[0x0] PERRDIAG[0xc0] > SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] > LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] > > SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0x0 > qinstart = 43727 qinfifonext = 43727 > QINFIFO: > WAITING_TID_QUEUES: > Pending list: > Total 0 > Kernel Free SCB list: 2 3 1 0 > Sequencer Complete DMA-inprog list: > Sequencer Complete list: > Sequencer DMA-Up and Complete list: > > scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x2 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x3] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x14] SHADDR = 0x06, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 > scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 > scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 > SIMODE0[0xc] > CCSCBCTL[0x4] > scsi1: REG0 == 0x2, SINDEX = 0x1c0, DINDEX = 0x102 > scsi1: SCBPTR == 0x2, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff2e > CDB 0 0 0 0 0 0 > STACK: 0xc9 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> > DevQ(0:0:0): 0 waiting > DevQ(0:1:0): 0 waiting > DevQ(0:2:0): 0 waiting > DevQ(0:3:0): 0 waiting > Recovery code sleeping > (scsi1:A:0:0): Bus Device Reset Message Sent > Recovery SCB completes > scsi1: Bus Device Reset on A:0. 1 SCBs aborted > Recovery code awake > scsi1: Device reset returning 0x2002 > init_special_inode: bogus i_mode (0) > smb_retry: no connection process > smb_add_request: request [f72b9e80, mid=0] timed out! > smb_delete_inode: could not close inode 2 > scsi1:0:0:0: Attempting to abort cmd d7639080: 0x34 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 0x0 > scsi1: At time of recovery, card was not paused > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< > scsi1: Dumping Card State at program address 0x2b Mode 0x22 > Card was paused > HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] > DFFSTAT[0x19] SCSISIGI[0x44] SCSIPHASE[0x0] SCSIBUS[0x0] > LASTPHASE[0x40] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] > SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0] > SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0xc0] > SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] > LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] > > SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0 > qinstart = 62598 qinfifonext = 62598 > QINFIFO: > WAITING_TID_QUEUES: > Pending list: > 1 FIFO_USE[0x0] SCB_CONTROL[0x0] SCB_SCSIID[0x7] > Total 1 > Kernel Free SCB list: 2 3 0 > Sequencer Complete DMA-inprog list: > Sequencer Complete list: > Sequencer DMA-Up and Complete list: > > scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x1 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x28] DFSTATUS[0x80] > SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0xc] SHADDR = 0x022ee112, SHCNT = 0xe > HADDR = 0x022ee100, HCNT = 0x20 CCSGCTL[0x10] > LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 > scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 > scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 > SIMODE0[0xc] > CCSCBCTL[0x4] > scsi1: REG0 == 0x1, SINDEX = 0x180, DINDEX = 0x102 > scsi1: SCBPTR == 0xff01, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0 > CDB 1 1 0 0 0 0 > STACK: 0x1f1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> > DevQ(0:0:0): 0 waiting > DevQ(0:1:0): 0 waiting > DevQ(0:2:0): 0 waiting > DevQ(0:3:0): 0 waiting > scsi1:0:0:0: Device is active, asserting ATN > Recovery code sleeping > (scsi1:A:0:0): Recovery SCB completes > Unexpected busfree in Data-in phase, 1 SCBs aborted, PRGMCNT == 0x1f5 > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< > scsi1: Dumping Card State at program address 0x1f3 Mode 0x11 > Card was paused > HS_MAILBOX[0x0] INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] > DFFSTAT[0x13] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] > LASTPHASE[0x40] SCSISEQ0[0x0] SCSISEQ1[0x12] SEQCTL0[0x0] > SEQINTCTL[0x0] SEQ_FLAGS[0x20] SEQ_FLAGS2[0x0] SSTAT0[0x0] > SSTAT1[0x8] SSTAT2[0xc0] SSTAT3[0x0] PERRDIAG[0xc0] > SIMODE1[0xac] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] > LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] > > SCB Count = 4 CMDS_PENDING = 1 LASTSCB 0xffff CURRSCB 0x1 NEXTSCB 0x0 > qinstart = 62598 qinfifonext = 62598 > QINFIFO: > WAITING_TID_QUEUES: > Pending list: > Total 0 > Kernel Free SCB list: 1 2 3 0 > Sequencer Complete DMA-inprog list: > Sequencer Complete list: > Sequencer DMA-Up and Complete list: > > scsi1: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89] > SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0 > HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10] > scsi1: FIFO1 Active, LONGJMP == 0x8063, SCB 0x1 > SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x8] DFSTATUS[0x81] > SG_CACHE_SHADOW[0xa] SG_STATE[0x0] DFFSXFRCTL[0x0] > SOFFCNT[0x0] MDFFSTAT[0xc] SHADDR = 0x022ee112, SHCNT = 0xe > HADDR = 0x022ee112, HCNT = 0xe CCSGCTL[0x10] > LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > 0x0 0x0 > scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52 > scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0 > SIMODE0[0xc] > CCSCBCTL[0x4] > scsi1: REG0 == 0x1, SINDEX = 0x180, DINDEX = 0x102 > scsi1: SCBPTR == 0x1, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff2e > CDB 3 0 0 80 8 d4 > STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 > <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>> > DevQ(0:0:0): 0 waiting > DevQ(0:1:0): 0 waiting > DevQ(0:2:0): 0 waiting > DevQ(0:3:0): 0 waiting > Recovery code awake > > ------------------------------------------------------------------------------ > Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA > -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise > -Strategies to boost innovation and cut costs with open source participation > -Receive a $600 discount off the registration fee with the source code: SFAD > http://p.sf.net/sfu/XcvMzF8H > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users -- Alex Chekholko office: 215-573-4523 cell: 347-401-4860 ch...@pcbi.upenn.edu ------------------------------------------------------------------------------ Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
