> > Start by assigning the drives a different media type for LTO2 versus LTO3.
> >
> > John
> >
> Thanks !
>
> like this in sd.conf one ?
>
> Device {
> Name = Drive-1 #
> Drive Index = 0
> Media Type = LT0-3
> Archive Device = /dev/st0
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes
> #
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
>
> Device {
> Name = Drive-2 #
> Drive Index = 1
> Media Type = LTO-2
> Archive Device = /dev/st1
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
> Device {
> Name = Drive-3 #
> Drive Index = 2
> Media Type = LTO-3
> Archive Device = /dev/st2
> AutomaticMount = yes; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes
> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
>
>
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
