Roy Kidder wrote: > One of my tapes was physically damaged. I want to label another tape with > the same label so that it truly takes the place of the old tape. In other > words, I don't want to delete the old one and create a new one. > > Can anyone tell me if this is possible? >
Yes. Say your tape has volume name of "A001". In bconsole: purge volume=A001 delete volume=A001 (you could probably skip the purge command, the delete should do the same thing.) stick in your new tape and then use the "label" command. If you use barcodes, then obviously the new barcode must match the old one and you would use "label slots=1 barcodes" if your new tape is in slot 1. In either case, the label command will ask you which pool to put the volume in and you should make it match the old tape. Mark Nienberg ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
