Timo Neuvonen wrote: >> Is it possible to have bacula close a tape once last job is run >> (backupcatalog in my case)? >> >> currently it leaves tapes on a "APPEND" status, then bacula wants to >> reuse the tape instead of taking a new one in the library. >> > > Easiest way (before knowing what you mean with "last job") might be defining > for how long time Bacula may use the same tape, starting from first write > (after recycling). For example, if your jobs (from "first" to "last") take a > maximum of 3 hours, you could set max volume use duration (check the correct > syntax from manual) to, say, 6 to 12 hours. While this time has expired > (next day?), Bacula will take another tape from the library.
this is what I use, but on the next bacula run, bacula kept wanting to load the tape prior to take into consideration that the tape was past the expiration time of usage. > -- > TiN > > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
