I have a weird issue that I cannot seem to figure out what is wrong.
I have some backups that failed due to bacula wanting to load a tape
that is not currently in the autochanger.
I have tried several things such as update slots, update slots scan,
update volume to change the inchanger flag.
Here is the error message :
05-Jan 14:05 vicenza.lan.lexum.pri-sd JobId 884: 3307 Issuing
autochanger "unload slot 1, drive 0" command.
05-Jan 14:06 vicenza.lan.lexum.pri-sd JobId 884: 3301 Issuing
autochanger "loaded? drive 0" command.
05-Jan 14:06 vicenza.lan.lexum.pri-sd JobId 884: 3302 Autochanger
"loaded? drive 0", result: nothing loaded.
05-Jan 14:06 vicenza.lan.lexum.pri-sd JobId 884: 3304 Issuing
autochanger "load slot 11, drive 0" command.
05-Jan 14:11 vicenza.lan.lexum.pri-sd JobId 884: Fatal error: 3992 Bad
autochanger "load slot 11, drive 0": ERR=Child died from signal 15:
Termination.
Results=source Element Address 1011 is Empty
Program killed by Bacula watchdog (timeout)
05-Jan 14:11 cagliari.lan.lexum.pri JobId 884: Fatal error: job.c:1817
Bad response to Append Data command. Wanted 3000 OK data
, got 3903 Error append data
here is the output of list volumes :
Pool: Weekly
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| mediaid | volumename | volstatus | enabled | volbytes |
volfiles | volretention | recycle | slot | inchanger | mediatype |
lastwritten |
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
| 2 | RC5881L3 | Full | 1 | 557,917,516,800 |
558 | 2,592,000 | 1 | 2 | 1 | DDS-4 | 2008-11-16
02:54:05 |
| 3 | RC5882L3 | Error | 1 | 298,272,844,800 |
299 | 2,592,000 | 1 | 3 | 1 | DDS-4 | 2008-11-17
11:26:24 |
| 4 | RC5883L3 | Full | 1 | 2,709,504 |
0 | 2,592,000 | 1 | 4 | 1 | DDS-4 | 2008-11-22
21:16:54 |
| 5 | RC5880L3 | Full | 1 | 569,828,689,920 |
578 | 2,592,000 | 1 | 1 | 1 | DDS-4 | 2008-11-15
21:59:49 |
| 6 | RC5884L3 | Full | 1 | 578,136,093,696 |
579 | 2,592,000 | 1 | 5 | 1 | DDS-4 | 2008-12-14
15:44:57 |
| 7 | RC5885L3 | Full | 1 | 729,953,215,488 |
730 | 2,592,000 | 1 | 6 | 1 | DDS-4 | 2008-12-15
09:14:35 |
| 8 | RC5886L3 | Full | 1 | 645,604,549,632 |
646 | 2,592,000 | 1 | 7 | 1 | DDS-4 | 2008-12-21
18:57:23 |
| 9 | RC5887L3 | Full | 1 | 694,786,627,584 |
695 | 2,592,000 | 1 | 8 | 1 | DDS-4 | 2008-12-22
12:39:17 |
| 10 | RC5890L3 | Append | 1 | 413,782,935,552 |
414 | 2,592,000 | 1 | 11 | 1 | DDS-4 | 2008-12-23
15:03:14 |
| 11 | RC5891L3 | Append | 1 | 64,512 |
0 | 2,592,000 | 1 | 12 | 1 | DDS-4 |
|
+---------+------------+-----------+---------+-----------------+----------+--------------+---------+------+-----------+-----------+---------------------+
version : vicenza.lan.lexum.pri-dir Version: 2.4.3 (10 October 2008)
i686-redhat-linux-gnu redhat Enterprise release
my bacula-sd config file:
Autochanger {
Name = Autochanger
Device = LTO
Changer Command = "/usr/lib/bacula/mtx-changer %c %o %S /dev/st0 %d"
Changer Device = /dev/sg1
}
Device {
Name = LTO
Drive Index = 0
Media Type = DDS-4
Archive Device = /dev/st0
AutomaticMount = yes
AlwaysOpen = yes
RemovableMedia = yes
RandomAccess = no
AutoChanger = yes
Spool Directory = /bacula/tapes/SPOOLDIR
}
My question is what can be done so that bacula knows what tapes are in
the autochanger ? because when this happens no other backups will work
until I restart the SD daemon(such as backup to another pool), and if I
run a backup from that pool it still errors out since the volume is not
there.
regards,
Pascal
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
