2008/12/17 Jari Fredriksson <ja...@iki.fi>: >> 2008/12/17 Marc Schiffbauer <m...@schiffbauer.net>: >>> * Sergio Belkin schrieb am 17.12.08 um 13:53 Uhr: >>>> How Can I define a remote storage in bacula-sd.conf ? >>>> namely a tape device that is in another host that >>>> bacula director. >>> >>> I think you ned to run the bacula-sd on that remote >>> host, not on the host that runs bacula-dir. >>> >>> -Marc >> >> >> I did so, but when start storage daemon, mt says: >> >> >> bacula /dev/nst0: Device or resource busy >> >> and I can't label it from director >> >> -- > > mt from shell says so, because the device is taken by bacula-sd. That is how > it is supposed to be. > > If you can't label it, that totally different. I don't know why that is. > >
I've found that I can't ever label tape. But there is more, I can't tar to tape, it outputs I/O error. lsscsi output is: [0:0:0:0] disk ServeRA raid 1 V1.0 /dev/sda [0:1:0:0] disk IBM-ESXS VPA146C3-ETS10 N A650 - [0:1:1:0] disk IBM-ESXS ST3146855SS BA26 - [0:3:0:0] enclosu IBM-ESXS VSC7160 1.06 - [0:3:1:0] tape IBM HH LTO Gen 3 76B0 /dev/st0 Now, I doing : mt -f /dev/nst0 erase But I issue this command at 8:07 AM GMT, and now is 9:44 AM GMT, is it common that it takes too much time? Thanks in advance -- -- Open Kairos http://www.openkairos.com Watch More TV http://sebelk.blogspot.com Sergio Belkin - ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
