---------- Forwarded message ---------- From: John Drescher <[EMAIL PROTECTED]> Date: Tue, Nov 25, 2008 at 1:25 PM Subject: Re: [Bacula-users] Disk to Disk to Tape To: Martin Hengst <[EMAIL PROTECTED]>
On Tue, Nov 25, 2008 at 11:44 AM, Martin Hengst <[EMAIL PROTECTED]> wrote: > In our Bacula setup, we're currently backing up several servers to a pool of > three large volumes on a RAID array. These volumes are set to auto-recycle > and are limited to 250gb in size. Typically, each volume holds at least one > full backup and several days worth of differentials before it hits the 250gb > cap. > > > > We have a Dell RD1000 backup unit (basically a usb sata drive) that has a > 300gb cartridge. What I'd like to do is to copy the volume file with the > last good full backups to that device so we can take them off site. > > > > I'm not opposed to getting my hands dirty in the process, you know, teach a > man to fish and all…but I'm pretty much at a loss as to where I should look > in the documentation to start figuring out how to do what I want to do. > > > > Any suggestions? > In bconsole list volumes and find the last written volume Then go to your storage and copy the file. Probably with the cp command at the terminal. John -- John M. Drescher ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
