> Hi,
>
> Always when I do a restore the next backup causes this error. I
> already added
>
> tape-config-list=
> "EXABYTE VXA-2", "Exabyte VXA-2", "VXA-2";
> VXA-2 = 1,0x36,0,0x19e39,2,0x80,0x81,1;
>
> to the Solaris 10 file /kernel/drv/st.conf to fix a problem when the
> end of tape is reached.
>
> 30-Sep 21:21 chet-dir JobId 584: Start Backup JobId 584,
> Job=Logs_Job_Chet.2008-09-30_21.21.03
> 30-Sep 21:21 chet-dir JobId 584: Using Device "ExabyteVXA-2Drive"
> 30-Sep 21:21 chet-sd JobId 584: 3307 Issuing autochanger "unload slot
> 10, drive 0" command.
> 30-Sep 21:21 chet-sd JobId 584: 3304 Issuing autochanger "load slot 4,
> drive 0" command.
> 30-Sep 21:22 chet-sd JobId 584: 3305 Autochanger "load slot 4, drive
> 0", status is OK.
> 30-Sep 21:22 chet-sd JobId 584: 3301 Issuing autochanger "loaded?
> drive 0" command.
> 30-Sep 21:22 chet-sd JobId 584: 3302 Autochanger "loaded? drive 0",
> result is Slot 4.
> 30-Sep 21:22 chet-sd JobId 584: Volume "A0000004" previously written,
> moving to end of data.
> 30-Sep 21:40 chet-sd JobId 584: Error: Unable to position to end of
> data on device "Exabyte VXA-2 Drive" (/dev/rmt/0cbn): ERR=dev.c:1326
> read error on "Exabyte VXA-2 Drive" (/dev/rmt/0cbn). ERR=I/O error.
>
> 30-Sep 21:40 chet-sd JobId 584: Marking Volume "A0000004" in Error in
> Catalog.
> 30-Sep 21:41 chet-dir JobId 584: Recycled volume "A0000005"
> 30-Sep 21:41 chet-sd JobId 584: 3307 Issuing autochanger "unload slot
> 4, drive 0" command.
> 30-Sep 21:43 chet-sd JobId 584: 3304 Issuing autochanger "load slot 5,
> drive 0" command.
> 30-Sep 21:43 chet-sd JobId 584: 3305 Autochanger "load slot 5, drive
> 0", status is OK.
> 30-Sep 21:43 chet-sd JobId 584: 3301 Issuing autochanger "loaded?
> drive 0" command.
> 30-Sep 21:43 chet-sd JobId 584: 3302 Autochanger "loaded? drive 0",
> result is Slot 5.
> 30-Sep 21:43 chet-sd JobId 584: Recycled volume "A0000005" on device
> "Exabyte VXA-2 Drive" (/dev/rmt/0cbn), all previous data lost.
>
> Thanks,
> Martijn
In addition to this this is the Device config in bacula-sd.conf
Device {
Name = "Exabyte VXA-2 Drive"
Drive Index = 0
Media Type = "VXA-2"
Device Type = Tape
Archive Device = /dev/rmt/0cbn
AutomaticMount = yes
AlwaysOpen = yes
RemovableMedia = yes
RandomAccess = no
AutoChanger = yes
Changer Command = "/opt/csw/etc/bacula/mtx-changer %c %o %S %a %d"
Alert Command = "sh -c '/opt/csw/sbin/tapeinfo -f %c |grep
TapeAlert|cat'"
Changer Device = /dev/scsi/changer/c2t0d0
Label Media = yes
Offline On Unmount = no
Hardware End of Medium = no
BSF at EOM = yes
Backward Space Record = no
Fast Forward Space File = no
Two EOF = yes
}
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
