Arno Lehmann wrote: Hi,
28.02.2008 12:49, Damian Brasher wrote: > > Hi List > > > > I have had some fairly regular job failures that I have pinpointed to be > > caused by tape status type error mismatches. The most common is that the > > tape status does not match that of the catalogue in a number of ways. > > Thanks for your response which has helped clarify things, >If you see this regularly, and with a file count of 0, chances are that >>either your tapes are damaged, your tape drive's firmware or the driver >is broken, or you've got a serious bug in your Bacula environment. >You need to fix the underlying problem. >The first step to do so is to run the btape tests and tweak the configuration >until they all run without >failure. I have seen occasional errors - I have decided to replace my SCSI card and cable. All the evidence I have collected suggests that there is a SCSI hardware fault. Regards DB -- Damian Brasher Systems Admin/Prog OMII-UK ECS Southampton University ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
