Hello
> > [..] But when Bacula executes the script "partition.hda", I have a
> problem.
> > The script makes sector 0 succesfully with the dd command
> > but after I have an error with the sfdisk command, here is the output :
> > My partition cannot get geometry
> > 0 cylinders, 0 heads, 0 sectors/track
> > sfdisk error : sector 0 don't have a msdos signature
> > /dev/hda : unrecognized partition table type
> > No partitions found
> > I tried to execute sfdisk -s to see my partition's size but it answers :
> > 0 blocks. [..]
>
> When you boot with the rescue cd do it detect your hard drive? Because for
> me hotplug(udev) is not working so in the init script I'm putting
> "/sbin/mknod /dev/sda b 8 0" and the other hard drivers (and partitions)
> manualy.
>
Bacula-rescue didn't detect my hard drive so I haves executed modprobe
ide-generic and drives have detected.
But the problem is the same, My partition cannot get geometry
0 cylinders, 0 heads, 0 sectors/track
When I have executed mount, only two partition of seven have mounted (/proc
and /)
but the main problem have seemed to be the capacity of hard disk.
It has detected 0 block, 0 sector, 0 cylinder, 0 head.
How detected the real capacity of hard disk ???
Thanks to help me
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
Bacula-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bacula-users
